Bosch AQUATAK 1350 Operating Instructions Manual page 17

F016 L69 975.book Seite 5 Dienstag, 2. November 2004 8:58 08
Cleaning/inspecting the strainer
S Expose the strainer 16 in the machine water inlet
connection by removing the inlet connector 9.
The strainer 16 can be easily removed with long
nose pliers. Rinse and replace. If damaged replace.
Never use the pressure washer without the strainer
or a damaged strainer.
Transport
To move the machine use the top handle and roll the
machine on the wheels.
To transport the unit up or down steps or over obsta-
cles, it must be lifted by the top handle.
If the unit is to be stored or transported horizontally
the detergent tank should be drained first.
1 • F016 L69 975 • TMS • 29.10.04
After use storage
Clean the exterior of the machine thoroughly using a
soft brush or cloth. Do not use water, solvents or pol-
ishes. Remove all debris, especially from the venti-
lation slots.
Frost will damage a pressure washer that has not
been completely emptied of water. The machine
should be stored in a frost free room.
Do not place other objects on top of the machine.
Ensure cables are not trapped when storing. Do not
kink high pressure hose.
English - 5