Changing The Engine Oil - Toro Z Master Professional 6000 74922 Operator's Manual

A
B
C
D
F
G
I
H
Figure 49

Changing the Engine Oil

Service Interval: After the first 8 hours
Note: Dispose of the used oil at a recycling center.
G008804
1. Start the engine and let it run for 5 minutes.
2. Park the machine so that the rear is slightly lower than
3. Disengage the PTO, move the motion-control levers to
4. Stop the engine, remove the key, and wait for all
E
J
G027659
38
Every 100 hours (more often in dirty or dusty
conditions).
Note: This warms the oil so it drains better.
the front to ensure that the oil drains completely.
the neutral-locked position, and set the parking brake.
moving parts to stop before leaving the operating
position (Figure 50).
Figure 50
G008804