Transferring Recordings To A Computer; Connecting The Camcorder To A Computer - Silvercrest scaa 5.00 a1 User Manual And Service Information

SilverCrest SCAA 5.00 A1

Transferring recordings to a computer

There are two ways of copying recordings from the camcorder to a computer:

by connecting the camcorder to a computer via the USB cable

by inserting the memory card into a card reader

Connecting the camcorder to a computer

Use the USB cable to connect the camcorder to an available USB port on a computer. Insert
the small plug of the supplied USB cable into the USB/charge port of your camcorder [13]
and the large plug into a USB port on your computer. Switch the camcorder on (if it is
powered off). The computer will setup a removable disk that stores to your recordings.
266 - English
Be careful when renaming any folders and files. Do NOT try to change
the folder or file names stored on the device from the computer or you
may not be able to read any files contained here on your camcorder.
Once you have copied your files or folders to the computer, you can
rename or edit them on the computer.