Pc Control Software - Xilica Audio Design XP series User Manual

9.0 PC Control Software

The XP series is shipped with a special PC Graphic User Interface (GUI)
application - XConsole. XConsole gives the user an option to control the
unit from a remote PC via the serial communication link. The GUI
application makes it much easier to control and monitor the device,
allowing the user to get the whole picture on one screen. Programs can be
recalled and stored from/to PC's hard drive, thus expanding the storage to
become virtually limitless.
XConsole can be connected to the XP series via RS232, USB or Ethernet.
USB requires the installation of additional driver. The user is given an
option to install it during the installation of XConsole, and if the user did not
install it at that time, they may choose to do so by running the USB driver
6
installer from the provided software CD.
6
The latest version of XConsole and USB driver are available at www.xilica.com.
XP Series User's manual - Page 26