Saving Voip Access Data; Precondition For The Following Steps; You Will Need - Siemens Gigaset S675 IP Manual

Saving VoIP access data

Precondition for the following steps:

Before you can use the Internet (VoIP) to phone any other subscribers on the Internet, the
fixed line network or the mobile phone network, you need a VoIP account.
>
Set up a VoIP account with a VoIP provider.
>
Have the VoIP account data you received from your VoIP provider to hand.

You will need:

>
Your registration name (login ID), your password and, if applicable (provider-dependent),
a user name (often this is your VoIP phone number).
Or
>
Your personal auto-configuration code (activation code), if your provider supports "auto-
matic configuration".
Please note:
>
The procedure below requires that your phone is automatically assigned an IP address by
the router (i.e. DHCP is enabled on router and phone).
In exceptional cases (e.g. if DHCP is not enabled on the router) you will have to assign a
static IP address to the base station for LAN access. You must enter this IP address on the
handset before carrying out the following steps. Further information can be found in the
user guide on the supplied CD.
The following handset menu can be used to make the entry:
p
(press right)
>
VoIP should be set as the standard connection for your phone (default setting). You will
then immediately receive a message if a connection to your provider's VoIP server cannot
be established due to incorrect/incomplete data.
¢ Ð ¢
¢
Base Local Network
¢
(enter system PIN)
9