Log; Initializing The Px Amplifier - Yamaha PX10 Reference Manual

 LOG
(Advanced mode only)
Indicates or saves the operation log in the PX amplifier.
q
w
q LOG LIST
Indicates the overall operation log stored in the PX amplifier.
The log is displayed in the order that events have occurred. The time information is dis-
played in "NNNN HHH:MM:SS" format, where the format represents the number of
hours (HHH)/minutes (MM)/seconds (SS) have elapsed since the (NNNN)
• Operation log indication
Rotating the main knob (to select an event) and pressing the knob (to actually determine
the event) show the detailed view.
NOTE
The Operation log can also be called up by selecting and determining the [
the main knob when the [ ] icon is shown in the HOME screen.
w SAVE TO USB
Save the latest operation log to a USB flash drive. The function is for user support refer-
ence.

Initializing the PX amplifier

There are three ways to initialize the PX amplifier.
 To initialize the current parameters
1.
Turn on while pressing the [A] key.
th
power-on.
2.
Rotate the main knob to select "CONFIG+TUNING" and press
the main knob.
] icon by using
NOTE
Current parameters are parameters set in the CONFIG WIZARD, AMP PRESET, and TUNING
screens. For details, refer to
Panel Operation — Initializing the PX amplifier
"Function list" (page 37).
PX10/PX8/PX5/PX3 Reference Manual
35