Related Manuals for Seal-a-Meal FSSMSL0160-033
Summary of Contents for Seal-a-Meal FSSMSL0160-033
- Page 1 Vacuum Food Sealer Space Saving Design Vacuum Food Storage System Reference Guide Preserves the taste and nutritional value of stored foods! www.sealameal.com READ AND SAVE THESE INSTRUCTIONS FSSMSL0160-033...
- Page 2 If the plug fits loosely into the AC outlet or if the AC outlet feels warm do not use that outlet. START ENJOYING THE BENEFITS OF YOUR SEAL-A-MEAL ® VACUUM FOOD STORAGE SYSTEM Thank you for purchasing this Seal-a-Meal Vacuum Sealer.
- Page 3 PREPARING YOUR SEAL-A-MEAL VACUUM FOOD STORAGE ® SYSTEM FOR USE Carefully unpack your Seal-a-Meal Vacuum Sealer and place it on a level surface. Be sure to remove all packing ® materials from the inside of the machine. Clean all parts according to the CARE AND CLEANING section in this manual before first use.
- Page 4 HOW TO MAKE CUSTOM SIZED BAGS 1. Pull enough bag material to hold item to be vacuum packaged, plus 3 inches. With a pair of scissors, cut desired bag length from Bag Roll. Make sure to cut in a straight line. Plug in Power Cord. 2.
- Page 5 HOW TO VACUUM SEAL WITH SEAL-A-MEAL BAGS ® 1. Place the items to be sealed into a pre-cut or custom sized bag. Leave at least 3 inches between the contents and the top of the bag to allow for bag contraction.
- Page 6 CARE AND CLEANING To Clean Appliance: 1. Remove Power Cord from electrical outlet. Do not immerse in liquid. 2. Check Gaskets and around Drip Tray to make sure they are free from food materials and liquid. Wipe off Gaskets and inside Drip Tray with warm, soapy water.
- Page 7 1 YEAR LIMITED WARRANTY Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, (collectively “JCS”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period.
- Page 8 www.sealameal.com © 2013 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Imported and distributed by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, 20B Hereford Street, Brampton, Ontario L6Y 0M1. Printed in China...
Need help?
Do you have a question about the FSSMSL0160-033 and is the answer not in the manual?
Questions and answers
I **** trying to make a bag. I can seal a r5eady. made bag, but when I try to make on, following the instructions, it doesn't work. Help!
To make a custom-sized bag using the Seal-a-Meal FSSMSL0160-033:
1. Pull enough bag material from the Bag Roll to fit the item to be packaged, plus an additional 3 inches.
2. Use scissors to cut the bag material in a straight line.
3. Ensure the bag is cut to the desired length.
4. The bag is now ready for vacuum sealing.
This answer is automatically generated
Ma machine ne passe pas au stade 3, c'est à dire qu'elle ne scellé pas mon sac. Que faire ?
If your Seal-a-Meal FSSMSL0160-033 machine does not progress to stage 3 and does not seal the bag, follow these steps:
1. Ensure proper placement: Make sure the open end of the bag is not in the drip tray but correctly placed on the sealing strip.
2. Close the lid properly: The machine will not start if the lid is not fully closed. Place one hand on each end of the upper lid and press firmly.
3. Check the bag: Ensure the bag is not custom-made with the cut end on the lower gasket or drip tray. It should be on the sealing strip.
4. Avoid overheating: Let the machine cool for 20 seconds between uses. If sealing many bags, wait 25 minutes between sessions.
5. Inspect the bag for leaks or punctures: A small hole or fold can prevent proper sealing. Use a new bag if necessary.
By following these steps, the machine should proceed to sealing.
This answer is automatically generated