Settings Of Gain Values For Your Reference; The Transmitter Setup Of Futaba - dji A2 User Manual

Gear
H3-2D

Settings of gain values for Your Reference

To set the value of basic gain and attitude gain you can refer to the following diagram. These values are only for
reference and may vary in practice.
Aircraft
Motor
F450 DJI-2212
F550 DJI-2212
S800 EVO+Z15 DJI-4114

The Transmitter setup of FUTABA

Please configure the Frequency item on your Transmitter adhere to the table below. (The names of FASST modes
here are based to the Transmitter FUTABA T8FG, please ensure to select the most similar mode as the names
differs for different Transmitters)
Transmitter type
FUTABA 18MZ
FUTABA 14MZ with TM-14
FUTABA 14SG
FUTABA 12Z 2.4G FASST with TM-14
FUTABA 12FG 2.4G FASST with TM-14
FUTABA 10CG or 10C with TM-10
FUTABA 9C SUPER with TM-7 or TM-8
FUTABA 8FG SUPER
FUTABA 8FG
FUTABA 7C 2.4G
FUTABA 6EX FASST
© 2013 DJI Innovations. All Rights Reserved
Channe 8 (AUX4)
Channe 12（AUX5）
Configuration Information
ESC Propeller Battery
DJI-30A DJI-8 Inch 3S-2200
DJI-30A DJI-8 Inch 4S-3300
DJI-40A DJI-15Inch 6S-15000
FRANCE\GENERAL
FRANCE\GENERAL
FRANCE\GENERAL
42 |
2-Position switch, e.g. SF
Knob switch, e.g. LD、RD
Basic
Weight Pitch Roll
890 g 150 150
1530 g 170 170
7000g 140 140
AREA
Default FASST-MULTI\FASST-7CH
Default
FASST-MULTI\FASST-7CH
Default
Default
Default
Default
Default
Default
Attitude
Yaw Pitch Roll Vertical
135 150 150 140
150 160 160 150
130 140 140 130
FASST
MULT\7CH
MULT\7CH
MULT\7CH
7CH
7CH
MLT2\MULT\7CH
MULT/7CH
Default
Default