Main Window - Panasonic WJ-ND200 Operating Instructions Manual

Main Window

Tree display
area
Tree display area
Icons of the detected WJ-ND300 (A)/WJ-ND200 and cameras will be displayed and their IP addresses and MAC
addresses will be displayed. (When failed to detect the camera, its MAC address will not be displayed.) Refer to the
next page for further information about the icons.
Network settings area
The network settings of the WJ-ND300 (A)/camera selected in the tree display area will be displayed. Only the net-
work settings will be displayed when the recorder in use is the WJ-ND200. The connected cameras will not be dis-
played in the tree display area.
[Delete] button: Click this button to delete the icon of the selected WJ-ND300 (A)/camera.
[Set] button: Click this button to determine the edited settings.
[Clear] button: Click this button to cancel the edited settings and return to the previous settings. The settings will
return to the previous settings only when the [Set] button is not clicked yet.
[CAM IP Auto Addressing] button*: Click this button to register the edited settings in the WJ-ND300 (A). IP
addresses will automatically be assigned to the cameras connected to the WJ-ND300 (A).
[Manual Registration] button*: Click this button to register the edited settings to the WJ-ND300 (A)/camera.
* The [CAM IP Auto Addressing] button and the [Manual Registration] button will be displayed only when the WJ-
ND300 (A) is selected in the tree display area.
[Search] button: Click this button to search the connected WJ-ND300 (A)/WJ-ND200 and the cameras connected
to the WJ-ND300 (A). The search result will be displayed in the tree area.
[Exit] button: Click this button to exit this software.
Notes:
• The above instruction is the example that all the connected recorders are WJ-ND300. When a WJ-ND300A is
connected, "WJ-ND300A" ("WJ-ND200" when a WJ-ND200 is connected) will be displayed next to the recorder
icon as the model number.
• When the detected recorder is the WJ-ND200, the connected cameras will not be displayed in the tree display
area.
• When the detected recorder is the WJ-ND200, only displaying of the network settings is available. The buttons
[Delete], [Set], [Clear], [CAM IP Auto Addressing] and [Manual Registration] will not be displayed.
8
Network settings
area