Index 1 Safety precautions and warnings ...3 2 Description ...5 3 Before you start using your pressure washer ...6 4 Operating your pressure washer ...7 5 After using your pressure washer ...9 6 Maintenance ...10 7 Trouble shooting ...12 8 Further information ...13 9 Technical data ...14...
Page 3
Mains power connection The following should be ob- served when connecting the high pressure washer to the electric installation: The electric installation shall be made by a certifi ed elec- trician and comply with IEC 364.
2 Description 2.1 Application 2.2 Operation elements and model survey This high-pressure washer has been developed for domestic use within: - Car, motorbike, boat, cara- van, trailer, patio/drive/fl ags- tones, woodwork, brickwork, barbecue, garden furniture, lawn mower See illustration at the end of this manual.
3 Before you start using your pressure washer 3.1 Mounting of trolley handle (models with trol- ley handle) 3.2 Mounting of quick coupling 3.3 Mounting of high pres- sure hose on spray gun 1. Place the trolley handle on the machine.
4 Operating your pressure washer 4.1 Connection of high pres- sure hose 4.2 Mounting of spray lance and Click & Clean nozzles 1. Mount the high pressure hose on the outlet (3). 1. Push the spray lance (6) into the spray gun (7) and screw it on.
Page 7
4.3 Water connection 4.4 Start and stop of the machine An ordinary 1/2" garden hose of min. 10 m and max. 25 m will be suitable. NOTE: Connection to the public mains according to regulations. The spray lance is affected by a thrust during operation - therefore always hold it fi...
To avoid accidents, the electric cable and the high pressure hose should always be winded carefully up around the handle. C 110.3 / C 110.3 X-TRA: Wind up the cable on the appropriate hook. The spray handle, lance and nozzles can be stored on the...
6 Maintenance 6.1 Cleaning of water inlet fi lter 6.2 Cleaning of nozzle WARNING! Always discon- nect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, please take the following advice: Wash out water hose, high pressure hose, spray lance and accessories before...
Page 10
6.3 Cleaning of machine vents 6.4 Greasing of couplings The machine should be kept clean so as to let cooling air pass freely through the ma- chine vents. To ensure an easy connec- tion and that o-rings do not dry up, the couplings should be greased regularly.
7 Trouble-shooting To avoid unnecessary disappointments, you should check the following before contacting the Nilfi sk service organization: Symptom Cause Machine refuses to start Machine not plugged in Defective socket Fuse has blown Defective extension cable Fluctuating pressure Pump sucking air Valves dirty, worn out or stuck Pump seals worn out...
8 Further information 8.1 Recycling the washer 8.2 Warranty conditions Make the old cleaner unusable immediately. 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli- ances with household waste. Nilfi sk guarantees high pres- sure washers for domestic use for 2 years.
9560 Hadsund Denmark Anton Sørensen, General Manager of Technical Operations EAPC High pressure washer Nilfi sk C 100.5-5 / C 110.3-5 / C 110.3-5 X-TRA AC 230-240 V 50 Hz 78 dB(A) 93 dB(A) The equipment refer in this document fulfi ls all the requirements of...
Need help?
Do you have a question about the C 110.3 and is the answer not in the manual?
Questions and answers
Are the nozzles adjustable to give a different spray pattern?
Which Snow Foam Gun is compatible with the Nilfisk C110.3 pressure washer?