Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Strong STR 650-1000 F+PF
- Page 1 USER MANUAL STR 650-1000 F+PF...
-
Page 2: Table Of Contents
3.2.Colour filter installation............. 9 4. Operation..................10 4.1.Aperture angle adjustment............. 10 5. Maintenance ..................11 5.1.Regular cleaning..............11 5.2.Lamp replacement ..............11 5.3.Lens replacement ..............11 6. Most common problems..............13 Statement of compliance ............... 14 User manual STR 650-1000 F+PF... -
Page 3: General Description
1. General description THEATRE lighting family of Strong is composed of a set of projectors for 650W or 1000W lamps. For this reason they are appropriate in facilities where high-power lighting is required, for instance: theatres, showrooms, etc. STR 650-1000 F+PF is a lighting projector with pressed fresnel lens. -
Page 4: Technical Data
99,9 quality, Ø100 mm Power supply cable 3x1,5mm 1metro Maximum projector temperature 160 ºC Minimum distance to objects 2 m (at the light beam) Maximum room temperature 40 ºC Weight 5,5 Kg. Dimensions 360x334x276 mm User manual STR 650-1000 F+PF... -
Page 5: Photometric Data
Luminance [lx] Projection Lamp Aperture Diameter distance [m] angle [º] [cm] Centre Round 10 (minimum) 5430 1004 63 (maximum) 10 (minimum) 6155 1000 63 (maximum) 10 (minimum) 1947 63 (maximum) 10 (minimum) 2953 1000 63 (maximum) User manual STR 650-1000 F+PF... -
Page 6: Dimensions
1.4. Dimensions Fig. 2 1. Filter holder fastener 4. Fastening knob 7. Front access fastener 2. Filter holder lid 5. Filter holder 8. Orienting handle 3. Handle 6. Safety grille 9. Focal adjustment nut User manual STR 650-1000 F+PF... -
Page 7: Accessories
2. Accessories The accessory range consists of the following products: STR 650-1000 V: Barndoor STR 650-1000 PF: Filter holder Dimensions 180x185 mm. Weight: 0,15 Kg. User manual STR 650-1000 F+PF... -
Page 8: Installation
Once the projector is hanging, vertical inclination can be adjusted by the lateral fastening knob (see 4 in figure 2). Unscrew it to orientate the projector and screw it when you consider that the light beam is correct. User manual STR 650-1000 F+PF... -
Page 9: Power Supply Connection
2). Then insert the colour filter in front of the safety grille so that it is placed between the inner grooves. Finally, proceed closing the filter holder lid in the same way as for the opening. User manual STR 650-1000 F+PF... -
Page 10: Operation
To fix it again, turn the fastening knob clockwise until fixed it. 4.1. Aperture angle adjustment The spotlight angle, and consequently the diameter of the light beam can be changed by turning to right and left the focal adjustment nut (see 9 in figure User manual STR 650-1000 F+PF... -
Page 11: Maintenance
WARNING: Do not touch the glass of the lamp because it could affect the service life of the product. If during the installation you touch the lamp glass, wipe with a cloth moistened with alcohol. User manual STR 650-1000 F+PF... -
Page 12: Lens Replacement
Finally reinsert the steel ring for holding the lens correctly. Close the front part of the projector and fasten it (see 7 in figure 2). Verify that the light beam of the new lens is correct. User manual STR 650-1000 F+PF... -
Page 13: Most Common Problems
If you want to do without this product, do not mix it with the ordinary waste. There are specific methods and systems for dividing electronic and electromagnetic used products that are described in 2002/96/EC directive, which is in force in the European Community countries. User manual STR 650-1000 F+PF... -
Page 14: Statement Of Compliance
STATEMENT OF COMPLIANCE We declare that the product: Mark: STRONG Models: STR 650-1000 F+PF Year of construction: 2012 Conforms to the following EC directives: 2006/95/EC: In relation to the safety requirements for material intended for use within specific voltage limits.
Need help?
Do you have a question about the STR 650-1000 F+PF and is the answer not in the manual?
Questions and answers