Service Mode; Outline Of Service Mode - Pioneer DDJ-T1 Service Manual

1
[Operation Check of Each Operating Element]
A
Operation check of the following operating elements cannot be performed in Service mode.
Connect the unit with a PC then check that the TRACTOR software operates properly, using each operating element.
Operating Element
Volume FILTER CONTROL
TEMPO
Fader
FADER A to D
CROSS FADER
Rotary encoder AUTO LOOP CONTROL
B
C

6. SERVICE MODE

6.1 OUTLINE OF SERVICE MODE

The following test modes are prepared for this machine.
1 Check of operator input and a display function.
D
It is the mode which checks each input and display function of buttons, JOG dials, encoders, slide switches and
needle pads.
2 Quality judging of JOG dial load.
It is the mode which judges the quality of the load when rotating JOG dial.
3 Error display.
Error detection and its display method of a device are shown.
4 Firmware update.
Explanation of the method of firmware update.
Refer to the "8.3 UPDATING OF THE FIRMWARE."
E
F
36
1
2
DECK MIXER
GAIN CONTROL A to D
EQ HI A to D
EQ MID A to D
MAIN VOL
HEADPHONE MIX
HEADPHONE VOL
DDJ-T1
2
3
FX
DRY/WET CONTROL
EFFECT 1 to 3 CONTROL
3
4
4