Import
Operation: Home > System settings > Import
The setup file, which is made outside in advance, of USB flash drive can
import to the management module configuration. By using the setup file,
operation time can be shortened at the site.
In the Import window, you can set up the management module using the
setup file.
1
Touch Home > System settings > Import, and then the Import
.
window is displayed.
For details, see Hitachi Compute Blade 500 Series Management Module Setup
Guide.
Tip:
•
When a single directory has over 50 files/directories in the USB device,
files/directories are displayed up to 50 in the Import window.
•
For files or directories in the USB device, characters other than ASCII
code (without ASCII extended partition) are not displayed correctly. You
should use ASCII codes for imported file name and directory path, which
indicates the stored file for import.
Legal information
Operation: Home > System settings > Legal information
In the Legal information window, you can confirm the copyright information
and license information of the open source software (OSS), which is used in
the LCD touch console.
1
Touch Home > System settings > Legal information, and then the
.
Legal information window is displayed.
Hardware maintenance
Operation: Home > Hardware maintenance
In the Hardware maintenance window, you can move to each setup
windows to set settings for operation and maintenance.
1
Touch Home > Hardware maintenance, and then the Hardware
.
maintenance window is displayed.
Server blade
Operation: Home > Hardware maintenance > Server blade
You can confirm the operation status of server blade, hardware information,
and sensor information without LAN connection.
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Functional detail
2-7