Contents 7 Other features 1 Important Set the alarm timer Safety Set the sleep timer Notice Listen to an external device Charge your devices 2 Your Micro Music System Ajust the display brightness Introduction What's in the box 8 Product information Overview of the main unit Specifications Overview of the remote control...
1 Important Warning • Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never look into the laser beam inside this apparatus. • Never place this apparatus on other electrical equipment. Safety • Keep this apparatus away from direct sunlight, naked flames or heat.
To of Directive 1999/5/EC. You can find the guard against this, set your volume to a safe Declaration of Conformity on www.philips.com/ level before your hearing adapts and leave support. it there. This apparatus includes this label: To establish a safe volume level: •...
The making of unauthorized copies of copy- This symbol on a product means that the protected material, including computer product is covered by European Directive programs, files, broadcasts and sound 2012/19/EU. recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, USB devices, Bluetooth devices, and other external devices; •...
Overview of the main unit • Connect USB storage devices. • Turn on the product. l SOURCE/PAIRING • Switch to standby mode or ECO power standby mode. • Press to select a source: DISC, USB, TUNER, AUDIO IN, Bluetooth. b Display panel • In Bluetooth mode, press and hold for • Show current status.
Overview of the remote • Skip to the previous/next track. control • Search within a track/disc/USB. • Tune to a radio station. • Adjust time. • Play tracks randomly. f ALBUM/PRESET • Select a preset radio station. • Skip to previous/next album. g DISPLAY/RDS • Adjust display brightness.
Page 10
q FM/AUDIO IN • Select FM source. • Select AUDIO IN source. /PAIRING • Select Bluetooth source. • Press and hold for three seconds until you hear a beep sound to enter pairing mode.
3 Get started Connect FM antenna Caution • For optimal reception, fully extend and adjust the • position of the antenna. Use of controls or adjustments or performance of • For better FM stereo reception, connect an outdoor procedures other than herein may result in hazardous FM antenna to the FM AERIAL socket.
Connect the power cable to the wall socket. Switch to standby mode Press again to switch the product to standby Prepare the remote control mode. » The clock (if set) is displayed on the panel. Caution • In standby mode, press to switch •...
Set the clock In standby mode, press and hold CLOCK for more than two seconds to enter the clock setting mode. » [24H] or [12H] is displayed. Press to select 24H or 12H hour format, and then press CLOCK. » The hour digits begin to blink. Press to set the hour, and then press CLOCK.
4 Play Play from disc Press CD to select CD source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. » Play starts automatically. If not, press Control play Start, pause, or resume play.
» Audio streams from your Bluetooth Compatibility with all Bluetooth devices is not guaranteed. enabled device to this product. • If you fail to search for "Philips BTM3360'' or cannot pair with this product, press and hold /PAIRING for three seconds until the Bluetooth indicator flashes blue quickly to enter pairing mode.
Page 16
To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range. To pair and connect a second device You can pair and connect a maximum of two Bluetooth-enabled devices to this product actively at the same time.
5 Listen to the Program radio stations radio manually Tune to a radio station. Tune to a radio station Press PROG to activate program mode. » PRG (program) displays on the screen. Press to allocate a number from 1–20 to this radio station, and then press •...
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect Press SOUND repeatedly to select a • preset sound effect. • Balance(Balance), Clear(Clear), Powerful(Powerful), Warm(Warm), and Bright(Bright). Adjust volume level • On the remote control, press VOL +/- repeatedly.
7 Other features • Alarm timer is not available in AUDIO IN mode. Note Set the alarm timer • If CD/USB source is selected, but no disc is placed or no USB device is connected, the FM source is selected automatically.
Connect the product to power. » Once the device is recognized, the charging starts. Note • Philips does not guarantee the compatibility of this product with all devices. Ajust the display brightness Charge your devices Press and hold DISPLAY/RDS repeatedly to...
8 Product information USB Direct Version 2.0 Full Speed Charging support 5V, 500mA Note Disc • Product information is subject to change without prior Laser Type Semiconductor notice. Disc Diameter 12 cm/8 cm Support Disc CD-DA, CD-R, CD- RW, MP3-CD Audio DAC 24 Bits/44.1 KHz Specifications...
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.1) • memory cards (requires an additional card reader to work with this unit) Supported USB formats: • USB or memory file format: FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate •...
Replace or clean the disc. device, check the following points before • Use a finalized CD or correct format disc. requesting service. If the problem remains unsolved, go to the Philips Web page (www. Cannot display some files in USB device philips.com/support). When you contact Philips, • The number of folders or files in the USB make sure that the device is nearby and the device has exceeded a certain limit.
Page 24
• This unit is already connected with another Bluetooth-enabled device. Disconnect that device and then try again. The paired mobile device connects and disconnects constantly. • The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them.
Page 26
Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. BTM3360_12_UM_V1.0...