Firmware Upgrade - Vislink HDR-1000 User And Technical Manual

2. Locate the Active Preset __, Change to Preset __ pull down menu. Select the
Preset number that you want to confi gure in the Change to pull down menu.
3. Click the Change button.
4. Set the new confi guration parameters such as Frequency and Modulation and
enter the information in the corresponding fi elds.
5. When you are fi nished entering the changes, click the Save button. The changes
are uploaded to your Receiver.
6. Check your active Preset by selecting Info > Status from the menu bar.

Firmware Upgrade

To upgrade the fi rmware in your radio, complete the following steps.
1. Download the fi rmware image from Vislink and save it onto your computer drive.
2. Select System > Firmware Upgrade from the menu bar. The Firmware Upgrade
screen displays.
3. Click the Browse button on the Firmware Upgrade screen and navigate to the
fi rmware image. Select the fi rmware image fi le, then click on the UPGRADE button
to start the fi rmware upgrade.
NOTE: Do not disconnect power during the upgrade process. It can take several
minutes to complete the upgrade process. Click Continue when prompted. When
the upgrade is complete, cycle power OFF then ON to reboot the radio.
HDR-1000 User and Technical Manual
Page 15