Clean Sensor .50 - DeLaRue MACH 12 User Manual

CLEAN SENSOR .50

--CLEAN INDICATED SENSOR
--PRESS MOTOR OR HOME
TO RESUME OPERATION
--VERIFY BAG COUNTS AND BATCH TOTAL
CLEAN SENSOR
Operator display messages
clean sensor
An object has blocked a Coin Sensor. Dis-
connect the Sorter from power (the battery
back--up circuitry will protect the coin totals).
Locate and clean the dirty Sensor, reconnect
the Sorter to power and resume operation as
shown in FIGURE #86.
Note: When the Clean Sensor Error has
been corrected, the coin quantity for that
station should be re--run to verify its
accuracy.
Note: Proper cleaning procedures are dis-
cussed later in this guide.
FIGURE #86
97