Customizing Projector Features; Image Sizing - Epson powerlite home cinema 3010+ User Manual

■
Select
■
Select
Signal, User Button, Language, and Lamp Hours).
4. Press the

Customizing Projector Features

Use the settings in this section to adjust the image size and position, suppress on-screen text,
and select basic setup options.

Image Sizing

Before adjusting any of these settings, make sure you have already selected an appropriate
aspect ratio for the type of picture you're viewing (see page 25).
■ Overscan
Signal > Advanced > Overscan
For component and HDMI video formats, this setting lets you see the edges of the image
that are not normally visible in the picture (see page 74). If you see interference when you
set
Overscan
Note: The Auto setting is only available when the input source is HDMI1, HDMI2.
■ Position
Signal > Position
Note: This setting cannot be used with a signal input through the HDMI 1 or HMDI 2 port.
Use the u, d, l, or r button to fine-tune the position of the image on the screen.
48
Making Detailed Adjustments
to clear all memory settings.
Reset Memory
to return all projector settings to their original defaults (except Input
Reset All
button to exit the menu system.
Menu
to , try adjusting the
Off
as described below.
Position