Stop/Go Function - Gorenje IQ641AC Instructions For Use, Installation, And Connection

Stop/Go function

16
Switching on the child lock
The hob is in stand-by mode. The display for each hotplate
shows 0..
1. Touch and hold the
lock. The red light to the right above the
the On/Off Button
If no buttons are touched within 10 seconds, the cooking
zone will automatically switch off . The child lock remains
active. You can even switch off the hob.
Touch the button
the child lock and unlock the control panel.
You must wait 10 seconds before switching the hob on
again with the On/Off button
child lock.
Switch the hob to child lock mode before cleaning
it to prevent it from accidentally switching on.
Stop / Go
Use the Stop / Go function to 'pause' the whole hob for
10 minutes while cooking. The power for all of the cooking
zones is automatically switched off . This is convenient, for
example, if a pan boiled over and you want to clean the
hob. You can also leave the hob unattended for a short
period of time without losing any settings.
Switching the hob to Stop / Go mode
One or more cooking zones are active.
1. Touch the button once.
You will hear a single bleep is shown in the display for
each cooking zone and the red light to the right above
the button is constantly illuminated.
Any set cooking timers/minute minders stop.
All of the buttons are inactive except the
the button and the On/Off button
If no buttons are touched within 10 minutes, all of the
active cooking zones are automatically switched off .
button to switch on the child
are constantly illuminated.
again within 10 seconds to switch off
in order to switch off the
.
button and
, button,