Hitachi EP-A8000 Instruction Manual page 10

Preparations for Operation
Install the dust filter
on the purifier.
Insert the filter all the
way until the label (dust
filter position indicator) is
hidden.
Attach the pre-filter to the body.
Incline the pre-filter and stably insert the latch nub into
the insertion holes of the body in order from top to bottom.
Close the pre-filter on the body filter side.
Rotate the knobs of the pre-filter (in two locations) to the
right to lock into the insertion holes of the body.
4
Lightly pull the pre-filter to confirm it does not come off.
Reinstall the panel on the purifier.
Insert the two tabs on top of the panel
into the two holes on the purifier.
Gently push the bottom of the panel
until it clicks to close it securely.
E-10
Insertion hole
Knob
Rotate the knob to the right by 90 degrees to lock it.
Insert into the hole.
(Continued)
Dust filter
Insert the latch nubs of the
Latch nub
pre-filter in order from top
to bottom.
Lock