Panasonic DP-C406 Operating Instructions Manual page 10

4
Select the location or destination.
Scan to SD Memory Card/USB Flash
Memory/Internal Hard Disk Drive
SD Memory
Card or USB
Flash Memory
Internal Hard
Disk Drive
The scanned image(s) cannot be saved to
the SD Memory Card or USB Flash Memory
if the setting of Function Parameter "70 SD/
USB Memory Function" (General Settings
> Key Operator Mode) is set to "No".
For more details on this setting, refer to
General Settings in the Operating
Instructions (For Function Parameters) of
provided CD-ROM.
The scanned image(s) cannot be saved to
the internal Hard Disk Drive if the setting of
Function Parameter "02 Scan to HD
Function" (Scanner Settings > Key
Operator Mode) is set to "No".
For more details on this setting, refer to
Scanner Settings in the Operating
Instructions (For Function Parameters) of
provided CD-ROM.
10
Select "SD Card / Hard Drive",
and then select "SD Card" or
"USB Flash Memory".
Refer to Scan to the SD
Memory Card (see page 13).
Refer to Scan to the USB
Flash Memory (see page
16).
Select "SD Card / Hard Drive",
and then select an Image Box.
Refer to Scan to the Internal
Hard Disk Drive (see page
19).
Transfer Scanned Image to:
Scan to a When a desired destination is
Computer selected from the Address
Book, a reception notice
appears on the destination.
Refer to Scan to a Computer
(see page 22).
Scan to Email Select "Email", and then select
the desired destination.
Refer to Scan to Email (see
page 24).
5
Press the Start key.
When scanning from the Platen Glass, place
the next original, and then follow the
instructions described on the Touch Panel
Display.
The scanned image(s) is transferred to the SD
Memory Card, USB Flash Memory, PC, or
Email.
When cancelling the operation, press the Stop key
on the Control Panel, and then follow the
instructions described on the Touch Panel Display.