Multi Duct - Kenmore 795. 72063.11 series Service Manual

3-6-3 Cap Duct LED LAMP(Bottom)
1. Unplug refrigerator power cord from electric outlet.
2. Open the refrigerator door to need diassembly.
3. Put flat screwdriver into service hole, remove the cover
of cap duct LED LAMP.
4. Remove the LED assembly from connector.
5. Replace LED assembly.
6. Assembly the cover in reverse order.

3-7 MULTI DUCT

1. Remove 2 screws and guide rail.
2. Remove the upper and lower Caps by using a flat
screwdriver and remove 2 screws as shown figure.
3. Disconnect the lead wire on the bottom position
4. Grip both side of multi duct, pull it out.
- 11 -