Descaling The Machine - Jura IMPRESSA XJ5 Professional Instructions For Use Manual

Descaling the machine

J
CAUTION
CAUTION
CAUTION
CAUTION
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 50 minutes.
E JURA descaling tablets are available from specialised dealers.
E If you use a CLARIS Pro Blue filter cartridge and this is acti-
vated, you will not be prompted to descale.
Precondition:
READY
nance button c lights up.
c T Press the Maintenance button.
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
AGENT IN TANK
T Remove and empty the water tank.
T Completely dissolve 3 JURA descaling tablets in a receptacle
holding 600 ml of water. This may take several minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
AGENT IN TANK
up.
/ is displayed and the Mainte-
DE-SCALE
and the Maintenance button c lights
5 Maintenance
35