Copying Inverse Image - Panasonic DP-C406 Operating Instructions Manual

Copying Inverse Image

The tonal inversion of image can be copied in black and white.
This function is only available when "Black" is selected in the Colour mode. If the "Inverse" is selected when
the other Colour mode has been set, a message appears prompting you to change the setting to "Black".
This function is cancelled if the Colour mode is changed from "Black" to the other Colour mode after selecting
"Inverse".
The Colour mode remains set to "Black" even if the Inverse mode is cancelled. To cancel the "Black" mode,
select other Colour mode or press the Reset key.
1
Place original(s).
Refer to Placing Originals (See page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select "More Menus".
4
Select "Zoom / Effects", and then
select "Inverse".
5
Enter the desired number of copies.
6
Press the Start key.
After finishing copying, press the Reset key to
return to the initial screen of the current active
mode.
1 2
87