Initial Setup - Samsung 4 series User Manual

When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and aerial.
ANT OUT
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the POWERP button. Setup is available only when the Source is set to TV.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting an aerial and
a channel
4
Setting the Clock
Mode
5
Complete
If You Want to Reset this Feature...
Select System - Plug&Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-
0." If you want to change the PIN number, use the Change PIN function.
You should do Setup (MENU → System) again at home although you did in shop.
ENG-Series 5000_4000_HK.indd 5
Connecting to Aerial

Initial Setup

Press the ▲ or ▼ button, then press the E button. Select the
desired OSD (On Screen Display) language.
Press the ▲ or ▼ button, then press theE button.
Select the Home Use mode. Store Demo Mode is for retail
environments.
✎
When pressing TV controller, the function menu screen
appears. Select the Menu(m) and press it more than 5
seconds using the controller. The Store Demo mode is
set.
✎
Cancel the Store Demo by selecting Source(s) and
pressing it more than 5 seconds.
✎
Store Demo is only for shop display. If you select it, several
functions are not able to use. Please select Home Use
when you watch at home.
Press the ▲ or ▼ button, select Air or Cable .
and press ◄ or ► to select a channel, then press E button to begin
memorizing all of the available channels.
✎
Press the E button at any time to interrupt the memorization
process.
Set the current time automatically or manually.
Press the E button.
Eng-5
2012-02-14 3:36:42