1.
Log in to the Message Manager's mailbox.
2.
2
3.
to assign a telephone number.
3
4.
Enter the desired number.
to change the first telephone number.
1
to change the second telephone number.
2
to change the third telephone number.
3
5.
to accept.
1
6.
Dial the telephone number.
7.
to accept.
2
8.
to change the telephone number.
1
to accept.
2
to review.
3
to add more digits.
4
to insert a pause.
5
to insert a wait for dial tone.
6
To set device status
For each device, the notification is enabled or disabled according to a preset schedule. The Message Manager
can enable a device according to a schedule. However, the System Administrator must first assign a
destination number to the desired device.
1.
Log in to the Message Manager's mailbox.
2.
2
2
3.
Enter the device number (1–6).
•
Device number 4, 5, or 6 is used to specify a device number that is "Device No. 1, 2, or 3" for
"E-mail/Text Message Device" in Web Maintenance Console.
•
If a telephone number has not been assigned to the selected device number 1, 2, or 3, you
cannot set the device status. Refer to "To assign notification numbers" to assign a telephone
number.
4.
Select the desired message type.
to notify all messages.
1
to notify urgent messages.
2
5.
Select when the device will be used for message notification.
for schedule (a notification is sent each time a message is received, but only during the
1
times programmed by the System Administrator).
for continuously.
2
for disable (notifications are not sent).
3
Customizing the Message Manager's Mailbox
The Message Manager can customize the Message Manager's mailbox by changing the following parameters.
–
The Message Manager's mailbox password
–
The extension numbers of Operator 1, 2, and 3
Document Version 2014-08
2.2.2 Message Manager Features
Operating Manual
269