When To Change The Thread Lifters; Correctly Replacing The Thread Lifters - Miele S6730 Operating Instructions Manual

Maintenance and care
When to change the thread
lifters
The thread lifters on the suction inlet to
the floorhead and the upholstery nozzle
can be replaced.
Check them from time to time and
replace them if the pile has worn down.
Correctly replacing the thread
lifters
^ Use a suitable tool to remove them
from the slots. There are two notches
for this.
^ Fit new thread lifters.
FiberTeQ and AirTeQ floorheads
^ Use a suitable tool to remove the
thread lifters from the slots, starting at
the sides.
^ Fit new thread lifters.
Cleaning the floorhead roller
(not possible on the FiberTeQ and
AirTeQ floorheads)
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove.
c Remove the roller.
^ Remove any threads and hair, replace
the roller and refit the bearing.
Spare parts are available from your
Miele Vacuum Cleaner Specialist, from
Miele (see back cover for contact
details) or via the internet at
www.miele-shop.com.
32