Dacia 2014 Sandero Driver's Handbook Manual
  1. Manuals
  2. Brands
  3. Dacia Manuals
  4. Automobile
  5. 2014 Sandero
  6. Driver's handbook manual

Dacia 2014 Sandero Driver's Handbook Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Driver's handbook
Sandero
Logan
Logan MCV

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2014 Sandero and is the answer not in the manual?

Questions and answers

Related Manuals for Dacia 2014 Sandero

Summary of Contents for Dacia 2014 Sandero

  • Page 1 Driver’s handbook Sandero Logan Logan MCV...

  • Page 3: Driving

    This handbook may also contain information about items of equipment to be introduced later in the model year. Throughout the manual, the “approved dealer” is your DACIA dealer. Enjoy driving your new vehicle.

  • Page 5: Table Of Contents

    Sections Getting to know your vehicle ....... Driving ..............Your comfort ............Maintenance ............Practical advice ............ Technical specifications ........Alphabetical index ..........
  • Page 7 Section 1: Getting to know your vehicle Keys, radio frequency remote control: general information ....... . Locking and unlocking the doors .

  • Page 8: Keys, Radio Frequency Remote Control: General Information

    KEYS, RADIO FREQUENCY REMOTE CONTROL: general information (1/2) Key A Radio frequency remote Driver’s responsibility control B 1 Coded key for ignition switch, doors Never leave your vehicle and fuel filler cap. 2 Locks all the opening elements. with the keys inside when leaving a child (or animal) 3 Unlocks all the opening elements.
  • Page 9 KEYS, RADIO FREQUENCY REMOTE CONTROL: general information (2/2) The remote control unit operating range This varies according to the environ- ment. It is therefore important when handling the remote control to ensure that you do not lock or unlock the ve- hicle by inadvertently pressing the but- Replacement and additional keys tons.

  • Page 10: Locking The Doors

    KEYS/RADIO FREQUENCY REMOTE CONTROL: use Locking the doors Press locking button 1. The hazard warning lights and indica- tor lights flash twice to indicate that the doors have locked. If a door or the tailgate is open or not properly shut, the doors or tailgate lock then quickly unlock and the hazard warning lights and indicator lights do not flash.

  • Page 11: Locking And Unlocking The Doors

    LOCKING AND UNLOCKING THE DOORS (1/2) Manual control From the inside Locking the doors manually Push in button 2 to lock and lift button 2 Turn lever 3 with the door open (using From the outside to unlock. the end of the key) and close the door. Unlock the doors using the key in a This means that the doors are then door lock 1.
  • Page 12 LOCKING AND UNLOCKING THE DOORS (2/2) Locking the opening Door and tailgate status elements without the radio indicator frequency remote control With the ignition on, the warning light integrated in switch 4 informs you of the For example, in the event of a dis- locking status of the opening elements: charged battery or the radio frequency remote control temporarily not working.

  • Page 13: Automatic Locking When Driving

    AUTOMATIC LOCKING WHEN DRIVING Operating principle When the engine is started, the system automatically locks the doors when the vehicle reaches a speed of approxi- mately 4 mph (7 km/h). Operating faults If you notice an operating fault (auto- matic locking impossible), first check that all doors are correctly locked.

  • Page 14: Opening And Closing The Doors

    OPENING AND CLOSING THE DOORS (1/2) Lights-on warning buzzer If you have left the lights on after switch- ing off the ignition, a reminder buzzer will sound when the driver’s door is opened. Door/tailgate open buzzer Depending on the vehicle, this alarm is fitted to the driver’s side door or on all opening elements.

  • Page 15: Child Safety

    OPENING AND CLOSING THE DOORS (2/2) Driver’s responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi- cient alone on your vehicle, even for a short time. Child safety They may pose a risk to themselves To make it impossible for the rear doors or to others by starting the engine, to be opened from the inside, move...

  • Page 16: Headrests

    FRONT HEADRESTS To remove the headrest Press button 1 and lift the headrest to release it (tilt the seatback backwards, if necessary). To refit the headrest Insert the rods into the sleeves, with the notches facing forwards, and lower the headrest to the desired height.

  • Page 17: Front Seats

    FRONT SEATS (1/2) To move forwards or Heated seats For safety reasons, carry backwards Depending on the vehicle, with the igni- out any adjustments when tion on, press switch 3. the vehicle is not being Lift bar 1 to release. driven.
  • Page 18 FRONT SEATS (2/2) To tilt the seatback Depending on the vehicle, move the control knob 4 or handle 5 and tilt the seatback to the desired position. For safety reasons, carry out any adjustments when the vehicle is not being driven. We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.

  • Page 19: Steering Wheel/Clock

    STEERING WHEEL/CLOCK Press and hold button 3 to enter the hour setting mode. When only the hours flash, press button 3 briefly, to scroll through them. Press and hold button 3 to enter the minute setting mode. When only the minutes flash, press button 3 briefly, to scroll through them.

  • Page 20: Seat Belts

    SEAT BELTS (1/6) Always wear your seat belt when trav- Before starting, first adjust your driv- elling in your vehicle. You must also ing position, then ask all occupants comply with the legislation of the par- to adjust their seat belts to ensure ticular country you are in.
  • Page 21 SEAT BELTS (2/6) ™ Seat belt reminder warning light Depending on the vehicle, it comes on when the engine is started and if the driver’s and/or passenger’s seat belt is not fastened. When the vehicle is being driven, it comes on and a beep sounds for approximately 2 minutes until the driver’s seat belt is fastened.
  • Page 22 SEAT BELTS (3/6) Five-door version Rear centre seat belt 10 (depending on vehicle) Rear side seat belts Remove the buckle 13 from its hous- Slowly unwind belt 7 and click buckle 9 ing 12. into red catch 8.. Slowly unwind belt 10 and click buckle 13 into the black catch 14.
  • Page 23 SEAT BELTS (4/6) Estate version Rear centre seat belt (depending on vehicle) Rear side seat belts Unwind belt 19 slowly from its hous- Slowly unwind belt 16 and click ing A. buckle 18 into the red catch 17. Fasten buckle 21 into the correspond- ing black catch 20 if fitted to the ve- hicle.
  • Page 24 SEAT BELTS (5/6) Four-door version Rear centre seat belt (depending on vehicle) Rear side seat belts Unwind belt 27 slowly from its hous- Slowly unwind belt 24 and click ing B. buckle 26 into the red catch 25. Fasten buckle 29 into the correspond- ing black catch 28 if fitted to the ve- hicle.
  • Page 25 SEAT BELTS (6/6) The following information applies to the vehicle’s front and rear seat belts. – No modification may be made to the component parts of the originally fitted restraint system: seat belts, seats and their mountings. For special operations (e.g. fitting child seats), contact an authorised dealer. –...

  • Page 26: Methods Of Restraint In Addition To The Front Seat Belts

    SYSTEMS IN ADDITION TO THE FRONT SEAT BELTS (1/4) – Have the entire restraint system checked following an accident. – No operation whatsoever is permitted on any part of the system (air bags, electronic con- trol units, wiring) and the system components must not be reused on any other vehicle, even if iden- tical.
  • Page 27 SYSTEMS IN ADDITION TO THE FRONT SEAT BELTS (2/4) Load limiter Each air bag system consists of: – an airbag and gas generator fitted Above a certain severity of impact, this on the steering wheel for the driver mechanism is used to limit the force of and, depending on the vehicle, in the the belt against the body so that it is at dashboard for the front passenger;...
  • Page 28 SYSTEMS IN ADDITION TO THE FRONT SEAT BELTS (3/4) Operation This system is only operational when the ignition is switched on. If a severe frontal impact occurs, the air bag(s) inflate(s) rapidly, cushion- ing the impact of the driver’s head and chest against the steering wheel and the front passenger’s head against the dashboard.
  • Page 29 SYSTEMS IN ADDITION TO THE FRONT SEAT BELTS (4/4) All of the warnings below are given so that the air bag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when the air bag inflates. Warnings concerning the driver’s air bag –...

  • Page 30: Side Protection Devices

    SIDE PROTECTION DEVICES Side air bags These air bags may be fitted to the front seats and are deployed at the sides of the seats (door side) to protect the oc- cupants in the event of a severe side impact. Warnings concerning the side air bag –...

  • Page 31: Additional Methods Of Restraint

    ADDITIONAL METHODS OF RESTRAINT All of the warnings below are given so that the air bag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when the air bag inflates. The air bag is designed to complement the action of the seat belt.

  • Page 32: Child Safety: General Information

    CHILD SAFETY: general information (1/3) Carrying children Special features of LPG Children, and adults, must be correctly versions seated and strapped in for all journeys. The vehicle’s LPG installa- The children being carried in your vehi- tion may lead to changes to cle are your responsibility.
  • Page 33 CHILD SAFETY: general information (2/3) Using a child seat Set a good example by always fas- The level of protection offered by the tening your seat belt and teaching child seat depends on its ability to re- your child: strain your child and on its installation. –...
  • Page 34 CHILD SAFETY: general information (3/3) Rear-facing child seats Forward-facing child seats Booster cushions A baby’s head is, proportionally, heavier The child’s head and abdomen need to From 15 kg or 4 years, the child can than that of an adult and its neck is very be protected as a priority.
  • Page 35 CHILD SAFETY: child/baby seat mounting (1/3) Attachment via the seat belt Attachment with the ISOFIX system The seat belt must be adjusted to Authorised ISOFIX child seats are ap- ensure that it is effective in the event of proved in accordance with regulation harsh braking or an impact.
  • Page 36 CHILD SAFETY: child/baby seat mounting (2/3) Anchorages 3 must be used to attach the child seat’s upper strap. It is forbidden to use other mounting points to attach this strap. The two ISOFIX rings 1 are located be- Five-door version The ISOFIX anchorage tween the seatback and the base and points have been exclu-...
  • Page 37 CHILD SAFETY: child/baby seat mounting (3/3) Anchorages 4 must be used to attach the child seat’s upper strap. It is forbidden to use other mounting points to attach this strap. Four-door version The ISOFIX anchorage points have been exclu- The third ring 4 of each side seat is used to attach the upper strap on some sively designed for child seats with the ISOFIX...

  • Page 38: Fitting A Child Seat

    CHILD SAFETY: fitting a child seat (1/7) Some seats are not suitable for fitting In the front seat After installing the child seat, if neces- child seats. The diagram on the follow- sary, the seat may be advanced (so as The laws concerning children travel- ing page shows you how to attach a to leave enough space in the rear seats...
  • Page 39 CHILD SAFETY: fitting a child seat (2/7) In the rear side seat Rear centre seat A carrycot can be installed across the A child seat may only be fitted in this vehicle and will take up at least two seat if it is equipped with an inertia-reel seats.
  • Page 40 CHILD SAFETY: fitting a child seat (3/7) The table below summarises the information already shown in the diagram on the following pages, to ensure the applicable regu- lations are respected. Four and five door or estate versions Front passenger seat Rear seats without Weight of...
  • Page 41 CHILD SAFETY: fitting a child seat (4/7) Refer to the “Child safety equipment” booklet available from the network to choose the seat suited to your child and rec- ommended for your vehicle. X = Seat not suitable for fitting child seats. U = Seat which allows a child seat with “Universal”...
  • Page 42 CHILD SAFETY: fitting a child seat (5/7) Visual installation of the five-door version Child seat attached using the ISOFIX fitting ü Seat which allows an ISOFIX child seat to be attached. The rear side seats are equipped with an anchorage point allowing a forward-facing ISOFIX child seat with “Universal”...
  • Page 43 CHILD SAFETY: fitting a child seat (6/7) Estate version diagram Child seat attached using the ISOFIX fitting ü Seat which allows an ISOFIX child seat to be attached. The rear side seats are equipped with an anchorage point allowing a forward-facing ISOFIX child seat with “Universal”...
  • Page 44 CHILD SAFETY: fitting a child seat (7/7) Visual installation of the four-door version Child seat attached using the ISOFIX fitting ü Seat which allows an ISOFIX child seat to be attached. The rear side seats are equipped with an anchorage point allowing a forward-facing ISOFIX child seat with “Universal”...

  • Page 45: Deactivating, Activating The Front Passenger Airbag

    CHILD SAFETY: deactivating/activating the front passenger air bag (1/3) Deactivating the front With the ignition on, it is essential to passenger air bags check that the 2 warning light is (depending on vehicle) lit up. In order to be able to install a rear- This warning light remains continu- facing child seat on the front passen- The passenger air bag must...
  • Page 46 CHILD SAFETY: deactivating/activating the front passenger air bag (2/3) The markings on the dashboard and labels A on each side of passenger sun blind 3 (example: label shown above) remind you of these instructions. DANGER Since front passenger airbag triggering and the position of a rear-facing child seat are incompatible, NEVER use a restraining device for rear-...
  • Page 47 CHILD SAFETY: deactivating/activating the front passenger air bag (3/3) Activation of the front Operating faults passenger air bag It is forbidden to fit a rear-facing child (depending on vehicle) seat to the front passenger seat if the air bag activation/deactivation system You should reactivate the air bag as is faulty.

  • Page 48: Driving Position

    DRIVING POSITION, LEFT-HAND DRIVE (1/2) 28 27 26 23 22 21 20 19 1.42...
  • Page 49 DRIVING POSITION, LEFT-HAND DRIVE (2/2) The presence of the equipment DEPENDS ON THE VEHICLE VERSION AND COUNTRY. 1 Side air vent. 12 Passenger airbag activation/deacti- 26 Gear lever. vation switch. 2 Side demister outlet. 27 Cruise control/speed limiter control. 13 Glove compartment 3 Stalk for: 28 Electric window control.
  • Page 50 DRIVING POSITION, RIGHT-HAND DRIVE (1/2) 10 11 32 31 17 16 27 26 25 24 1.44...
  • Page 51 DRIVING POSITION, RIGHT-HAND DRIVE (2/2) The presence of the equipment DEPENDS ON THE VEHICLE VERSION AND COUNTRY. 1 Side air vent. 12 Fuse box. 24 Cigarette lighter or accessories socket. 2 Side demister outlet. 13 Controls for: 25 Location for ashtray or cup holder. 3 Location for passenger air bag.

  • Page 52: Warning Lights

    WARNING LIGHTS (1/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY. á Main beam headlight tell-tale light Dipped beam headlight tell- Ò tale If the orange warning light comes on while you are driving, Front fog light tell-tale light drive carefully to an authorised dealer as soon as possible.
  • Page 53 WARNING LIGHTS (2/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY. Ò Warning light malfunction Ô Coolant temperature warn- (red or orange) ing light If this remains lit while driving, ac- Urgent stop warning light (red) companied by a beep, this means the This lights up when the ignition is engine is overheating.
  • Page 54 WARNING LIGHTS (3/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY. É Preheating warning light (on Anti-lock braking warning diesel version) light This should come on when the igni- This lights up when the ignition is tion is switched on.
  • Page 55 WARNING LIGHTS (4/4) The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY. Electronic Stability Program Ð Speed limiter warning light (ESP) and traction control Refer to the information on system (ASR) activation warning “Speed limiter” in Section 2. light Water in the diesel filter There are several reasons for the warn-...

  • Page 56: Displays And Indicators

    DISPLAYS AND INDICATORS (1/2) Rev counter 1 (rpm x 1,000) Speedometer 2 Sequential gearbox display 3 This indicates the gear engaged. Refer to the information under “Sequential Overspeed buzzer gearbox” in Section 2. Depending on the vehicle, a buzzer sounds for approximately 10 seconds every 30 seconds, as long as the ve- hicle is travelling in excess of 72 mph (120 km/h).
  • Page 57 DISPLAYS AND INDICATORS (2/2) Fuel gauge warning light 4 On-board computer A or B or 5 Refer to the information on the “Trip computer and warning system” in The number of squares lit shows the Section 1. fuel level. When it is at minimum, the squares disappear and the low fuel level warning light flashes.

  • Page 58: On-Board Computer

    ON-BOARD COMPUTER (1/5) Estimated range Interpreting some of the g) Distance travelled values displayed after h) Average speed resetting Oil change interval The values showing average fuel con- Speed limiter sumption, range and average speed k) Clock Exterior temperature will become more stable and reliable m) Reset the tyre pressure.
  • Page 59 ON-BOARD COMPUTER (2/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected Display A Display B a) Total mileage recorder. b) Trip mileage recorder. – c) Fuel used since the last time the reset button was pressed. d) Average fuel consumption since the last time the reset button was pressed.
  • Page 60 ON-BOARD COMPUTER (3/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected Display A Display B e) Current fuel consumption. – f) Estimated range with remaining fuel. This range takes into account the average fuel consumption since the –...
  • Page 61 ON-BOARD COMPUTER (4/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected Display A Display B j) Mileage before service Distance remaining until the next oil change. There are several scenarios: Ê...
  • Page 62 ON-BOARD COMPUTER (5/5) The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY. Examples of selections Interpreting the display selected Display A Display B j) Cruise control and speed limiter programmed speed (if activated). – Refer to the information on the “Speed limiter” in Section 2. k) Time.

  • Page 63: Exterior Lighting And Signals

    EXTERIOR LIGHTING AND SIGNALS (1/2) Dipped beam Daytime running lights headlights function (front lights only) Turn the end of stalk 1 until the symbol is opposite mark 2. These lights are automatically lit during daylight hours. They are deactivated This indicator light on the instrument when the main and dipped beams are panel comes on.
  • Page 64 EXTERIOR LIGHTING AND SIGNALS (2/2) Rear fog lights Turning off the fog lights Turn centre ring 3 on the stalk until the symbol faces mark 2. Turn centre ring 3 on the stalk until the symbol faces mark 2. The fog lights only light up if the exterior lights have been switched on.

  • Page 65: Headlight Beam Adjustment

    HEADLIGHT BEAM ADJUSTMENT Examples of positions for control A depending on the load All versions except Utility Commercial Estate and Estate vehicles vehicles Driver alone or with front passenger Driver with one front passenger and two or – three rear passengers Control A is used to adjust the height of the headlight beams according to the load.

  • Page 66: Rear-View Mirrors

    REAR VIEW MIRRORS Door mirrors with manual Door mirrors with electrical Interior rear view mirror adjustment adjustment: The interior rear-view mirror is adjusta- ble. When driving at night, tilt lever 3 to To adjust the door mirror, move With the ignition on, move button 2: avoid being dazzled by the headlights switch 1.

  • Page 67: Audible And Visual Signals

    AUDIBLE AND VISUAL SIGNALS Horn Hazard warning lights Direction indicators é Move stalk 1 parallel to the steering Press the end of the stalk 1 or on the Press switch 2. wheel and in the direction you are going steering wheel boss A. This switch activates all four direction to turn it.

  • Page 68: Screen Washer, Wiper

    WINDSCREEN WASH/WIPE Windscreen wiper With the ignition on, pull stalk 1 towards you. In frosty weather, make sure that the wiper blades are not stuck by ice A brief pull will trigger a single sweep (risk of motor overheating). of the wipers, in addition to the wind- screen washer.
  • Page 69 REAR WINDSCREEN WASHER/WIPER Rear screen washer/ wiper With the ignition switched on, turn the end of stalk 2 to align the symbol with mark 1. When the stalk is released, it returns to the rear screen wiper position. Rear screen wiper With the ignition switched on, turn the end of stalk 2 to align the symbol with mark 1.

  • Page 70: Fuel Tank (Filling With Fuel)

    FUEL TANK (1/5) Fuel grade Fuel filler cap: this is spe- Use a high-grade fuel that complies cific to the vehicle type. If with the legislation in force in each you have to replace it, make country. It must conform to the specifi- sure the new cap is of the cations given on label B inside the fuel same type.
  • Page 71 FUEL TANK (2/5) Petrol version Filling up with petrol or diesel With the ignition off, insert the nozzle to It is essential to use unleaded petrol. open the valve and insert it fully before The octane rating (RON) should match turning it on to fill the fuel tank (risk of the information given on the label B lo- splashing).
  • Page 72 FUEL TANK (3/5) LPG versions Useful capacity of fuel tank: approx. 32 litres. Filling up with LPG Engage the handbrake, stop the engine, switch off the ignition and switch off the lights. Always respect the safety instructions given at filling stations. When filling the tank, add the desired quantity of LPG.
  • Page 73 FUEL TANK (4/5) When the pump finishes or if it has dif- ficulties operating, this means that the maximum tank fill level (80%) has been reached. The filling will stop as soon as you re- lease the button. Release the stop lever (a small amount of gas may be re- leased), lift the pistol and place it on the distributor.
  • Page 74 FUEL TANK (5/5) The engine can now be restarted. If the engine does not start after several attempts, contact an approved Dealer. Vehicles without priming bulb 5 Put the ignition key in “Ignition On” (M) position and wait a few minutes before starting.
  • Page 75 Section 2: Driving (Advice on use relating to fuel economy and the environment) Running in, Ignition switch ............Special features of petrol versions .

  • Page 76: Running In, Ignition Switch

    RUNNING IN, IGNITION SWITCH Petrol version Ignition on position M For the first 600 miles (1,000 km), do The ignition is switched on: not exceed 78 mph (130 km/h) in the – petrol version: the engine may be highest gear, or 3,000 to 3,500 rpm. started.

  • Page 77: Starting The Engine

    STARTING/STOPPING THE ENGINE Starting the engine LPG versions Special note The engine is always started using Depending on the vehicle, accessories In very cold conditions (temperatures petrol: (e.g. radio) stop working either when below –20°C): so that it is easier to the engine is switched off or when the start the engine, switch on the ignition –...

  • Page 78: Special Features Of Petrol Versions

    SPECIAL FEATURES OF PETROL VERSIONS The following operating conditions If you notice any of the above operating should be avoided: faults, have the necessary repairs car- ried out as soon as possible by an ap- – driving for long periods when the low proved dealer.

  • Page 79: Special Features Of Diesel Versions

    SPECIAL FEATURES OF DIESEL VERSIONS Diesel engine speed Precautions to be taken in winter Diesel engines are fitted with an injec- To avoid any faults in icy weather: tion pump which prevents the engine – ensure that the battery is always fully speed being exceeded irrespective of charged, the gear selected.

  • Page 80: Special Features Of Lpg Versions

    SPECIAL FEATURES OF LPG VERSIONS (1/3) LPG vehicles Fuel gauge warning light A These vehicles operate using petrol or Warning lights A (4 green lights and LPG. 1 red light) indicate the level in the LPG They have two separate tanks. tank (1 light = approximately 1/5).
  • Page 81 SPECIAL FEATURES OF LPG VERSIONS (2/3) Operating fault In the event of a fault which may affect the correct operation of the engine, the system automatically switches from LPG to petrol mode. This is confirmed by: – the appearance of the yellow warn- ing light B;...

  • Page 82: In The Event Of An Accident

    SPECIAL FEATURES OF LPG VERSIONS (3/3) If driving under severe LPG has a very specific conditions smell so you will be able to detect any leaks easily. If If driving under severe conditions you smell gas in your vehi- (heavily laden vehicle, high outside cle or immediately surrounding your temperature, starting on a steep slope, vehicle:...

  • Page 83: Gear Lever

    GEAR LEVER Selecting reverse gear (vehicle stationary) Vehicles with manual gearbox: refer to the grid on the gear lever knob 1. An impact to the under- Vehicles with a sequential gear- side of the vehicle while box: refer to the information under manoeuvring (e.g.: stri- “Sequential gearbox”...

  • Page 84: Driving Advice, Eco-Driving

    DRIVING ADVICE, ECO-DRIVING (1/4) Fuel consumption is accredited in ac- cordance with a standard regulatory method. Identical for all manufactur- ers, this enables vehicles to be com- pared with one another. Consumption in real time depends on vehicle usage conditions, the equipment fitted and the user’s driving style.

  • Page 85: Eco Mode

    DRIVING ADVICE, ECO-DRIVING (2/4) Disabling the function Press switch 3. The 2 light goes out on the in- strument panel to confirm deactivation. ECO mode Activating the function Press switch 3. ECO mode is a function which opti- mises fuel consumption. Depending on the vehicle, this acts on certain The 2 warning light comes on on...
  • Page 86 DRIVING ADVICE, ECO-DRIVING (3/4) – Avoid sudden acceleration. – Brake as little as possible. If you an- ticipate an obstacle or bend in ad- vance, you may then simply release the accelerator pedal. – Do not try to maintain the same speed up a hill, accelerate no more than you would on the level.
  • Page 87 DRIVING ADVICE, ECO-DRIVING (4/4) – In vehicles fitted with air condi- tioning, it is normal to observe an increase in fuel consumption (es- pecially in urban conditions) when it is used. For vehicles fitted with manual air conditioning, switch off the system when it is not required.

  • Page 88: Maintenance And Antipollution Advice

    MAINTENANCE AND ANTIPOLLUTION ADVICE Your vehicle complies with criteria for In addition, replacing engine, fuel – Air filter: a choked element will recycling and recovering vehicles at the supply system and exhaust compo- reduce efficiency. It must be re- end of their service life which will come nents with parts other than those origi- placed.

  • Page 89: Environment

    ENVIRONMENT Your vehicle has been designed with Emissions – At the end of the vehicle’s service respect for the environment in mind for life, it should be sent to approved Your vehicle has been designed to emit its entire service life: during production, centres to ensure that it is recycled.

  • Page 90: Tyre Pressure Loss Warning

    TYRE PRESSURE LOSS WARNING (1/3) Resetting the standard level for the tyre pressures This should be done: – when the standard tyre pressure needs to be changed to adapt to usage conditions (empty, carrying a load, motorway driving, etc.); – after changing a wheel. It should always be done after checking the tyre pressure of all four tyres when cold.
  • Page 91 TYRE PRESSURE LOSS WARNING (2/3) Note: Puncture The standard tyre pressure cannot be less than that recommended and indi- The warning light and the red cated on the door frame. Ò warning light light up on the in- strument panel, alongside a beep. Display This indicates that at least one wheel is punctured or severely underinflated.
  • Page 92 TYRE PRESSURE LOSS WARNING (3/3) Check tyre sensors Readjustment of tyre Replacing wheels/tyres pressures This system requires specific equip- The warning light flashes for ment (wheels, tyres, hubcaps, etc.). The tyre pressures must be adjusted several seconds, then stays on, along Contact an approved Dealer to fit new when cold (please refer to the label lo- Ò...

  • Page 93: Handbrake

    HANDBRAKE/POWER-ASSISTED STEERING To apply Power-assisted steering Pull lever 1 upwards and make sure the With the engine running, do not leave vehicle is immobilised. the steering wheel at full lock while sta- tionary as this may damage the power- assisted steering pump. Never drive with an inadequately charged battery.

  • Page 94: Driver Correction Devices And Aids

    DRIVER CORRECTION DEVICES/AIDS (1/4) Depending on the vehicle, this is com- ABS (anti-lock braking Operating faults posed of: system) – of the ABS (anti-lock braking – If the warning light on the ins- Under heavy braking, the ABS prevents system); trument panel comes on while dri- the wheels from locking, allowing the –...
  • Page 95 DRIVER CORRECTION DEVICES/AIDS (2/4) Electronic stability control Understeer control Operating fault When the system detects an opera- ESC with understeer control This system optimises the action of the and traction control ASR ESC in the case of pronounced un- ting fault, the warning light on dersteer (loss of front axle road hol- the instrument panel comes on.

  • Page 96: Emergency Brake Assist

    DRIVER CORRECTION DEVICES/AIDS (3/4) Emergency brake assist This system supplements the ABS and helps reduce vehicle stopping dis- tances. Operating principle The system is for detecting an emer- gency braking situation. In this case, the braking assistance immediately de- velops maximum power and may trig- ger ABS regulation.
  • Page 97 DRIVER CORRECTION DEVICES/AIDS (4/4) Hill start assistance The hill start assistance This device assists the driver when system cannot completely starting on hills (ascending or descend- prevent the vehicle from ing). It prevents the vehicle from rolling rolling backwards in all sit- forwards or backwards by automatically uations (extremely steep gradients, applying the brakes when the driver lifts...
  • Page 98 CRUISE CONTROL/SPEED LIMITER: speed limiter function (1/3) The speed limiter function helps you Controls Switching on stay within the driving speed limit that 1 Main “On/Off” switch. Press the side switch 1 . Warning you choose, known as the limit speed. light 6 comes on, lit orange, and the 2 Limit speed activation, storage and message “LIMIT”...

  • Page 99: Speed Limiter

    CRUISE CONTROL/SPEED LIMITER: speed limiter function (2/3) Varying the limit speed Exceeding the limit speed The limit speed may be changed by re- It is possible to exceed the limit speed peatedly pressing: at any time. To do this: press the accel- erator pedal firmly and fully (beyond –...
  • Page 100 CRUISE CONTROL/SPEED LIMITER: speed limiter function (3/3) Recalling the limit speed If a speed has been saved, it can be re- called by pressing switch 4 ((R)). Putting the function on Switching off the function standby The speed limiter function is deac- tivated if you press switch 1: in this The speed limiter function is suspended case a speed is no longer stored.
  • Page 101 CRUISE CONTROL/SPEED LIMITER: cruise control function (1/4) This function is an additio- nal driving aid. However, the function does not take the place of the driver. Therefore, it can under no circums- The cruise control function helps you to Controls tances replace the driver’s responsi- maintain your driving speed at a speed bility to respect speed limits and to...

  • Page 102: Cruise Control

    CRUISE CONTROL/SPEED LIMITER: cruise control function (2/4) Switching on Activating cruise control Driving At a steady speed (above 18 mph Once a cruising speed is stored and Press switch 1 side (30 km/h approximately)) press switch 2 the cruise control function is active, The warning light 6 comes on, lit green, or (+): the function is activated and the you may lift your foot off the accelera-...
  • Page 103 CRUISE CONTROL/SPEED LIMITER: cruise control function (3/4) Exceeding the cruising speed The cruising speed may be exceeded at any time by depressing the accele- rator pedal. While it is being exceeded, the cruising speed flashes on the ins- trument panel. Then, release the accelerator: after a few seconds, the vehicle will automa- tically return to its set cruising speed.
  • Page 104 CRUISE CONTROL/SPEED LIMITER: cruise control function (4/4) Returning to the cruising speed If a speed is stored, it can be recalled, once you are sure that the road condi- tions are suitable (traffic, road sur- face, weather conditions, etc.). Press switch 4 (R) if the vehicle speed is above 20 mph (30 km/h).

  • Page 105: Parking Distance Control

    PARKING DISTANCE CONTROL (1/2) Operating principle Ultrasonic sensors, fitted in the vehi- cle’s rear bumper, measure the dis- tance between the vehicle and an ob- stacle when reversing. This measurement is indicated by beeps which become more frequent the closer you come to the obstacle, until they become a continuous beep when This function is an addi- the vehicle is approximately 40 centi-...
  • Page 106 PARKING DISTANCE CONTROL (2/2) Operating faults When the system detects an operating fault, there will be a three-second con- tinuous beep as a warning. Please con- sult an authorised dealer. Deactivating the system You can deactivate the system by pressing switch 1. The warning light built into the switch remains lit constantly.

  • Page 107: Sequential Gearbox

    SEQUENTIAL GEARBOX (1/6) Selector lever 1 Gear shift pattern Display – This allows you to engage forward (see the marking on the lever) 2 : automatic mode gear, reverse and neutral and to – to change down 3 : brake pedal depressed warning light change gear in manual mode.
  • Page 108 SEQUENTIAL GEARBOX (2/6) Operation Reverse gear (from neutral, with the vehicle stationary) Switch on the ignition. The display on the instrument panel With the brake pedal depressed, posi- switches on. tion the selector lever to R. The letter R If neutral (N) is displayed, start the appears on the display.
  • Page 109 SEQUENTIAL GEARBOX (3/6) Driving in manual mode The system will not tolerate a series The vehicle will move off again: of up or down changes that cause the – either slowly, if you release the brake This mode can be activated at any time engine to underrev or overrev.
  • Page 110 SEQUENTIAL GEARBOX (4/6) Driving in automatic mode The vehicle will move off again: Accelerating and overtaking – either slowly, if you release the brake Each time the ignition is switched on, – slowly depress the accelerator pedal without accelerating (e.g. when in a starting in neutral, place the lever to D to accelerate gradually, traffic jam),...
  • Page 111 SEQUENTIAL GEARBOX (5/6) Parking Bleep Special circumstances When the vehicle is immobilised Never leave the vehicle with the engine – If the bends and road surface do running when in gear. For safety rea- not allow you to stay in automatic –...
  • Page 112 SEQUENTIAL GEARBOX (6/6) Towing a vehicle with a sequential gearbox If the gearbox is stuck in a gear: – switch on the ignition, – select neutral, – check that the gearbox is in neutral, – turn off the ignition. If you cannot find neutral you must tow the vehicle with the front wheels raised.

  • Page 113: Your Comfort

    Section 3: Your comfort Air vents, air outlets ............. . Heating, Ventilation, Air conditioning .

  • Page 114: Air Vents, Air Outlets

    AIR VENTS, air outlets (1/2) 1 Left-hand side air vent 5 right-hand side window demister outlet 2 Left-hand side window demister vent 6 Right-hand air vent 3 Windscreen demisting vents 7 Front passenger footwell heater outlets 4 Centre air vents 8 Control panel...

  • Page 115: Air Flow

    AIR VENTS, air outlets (2/2) Air flow Direction Air vents 9 Air vents 9 To open, press on the air vent (point 10) Swivel the air vent 9. To remove bad odours from your until it is open as far as required. vehicles, only use the systems de- Air vents 11 signed for this purpose.

  • Page 116: Heating, Ventilation, Air Conditioning

    HEATING, VENTILATION, AIR CONDITIONING (1/3) Adjusting the air temperature Turn control 5 to obtain the desired temperature. The further towards the red the slide is, the higher the tempera- ture will be. Adjusting the ventilation fan speed. Turn control 3 from 0 to 4. The further to the right it is positioned, the more air is blown into the passenger compart- ment.
  • Page 117 HEATING, VENTILATION, AIR CONDITIONING (2/3) Rapid demisting Turn controls 1, 3 and 6 to positions – air from the outside; – maximum fan speed; – demisting. Using the climate control increases the speed of demisting. Heated rear windscreen/ Heated windscreen Switching passenger Air recirculation is used to: With the engine running, press...
  • Page 118 HEATING, VENTILATION, AIR CONDITIONING (3/3) Switching air conditioning on or off The air conditioning is switched on (in- dicator light illuminated) or off (indicator light extinguished) using button 2. Activation is not possible if control 3 is set to 0. The air conditioning system is used for: –...

  • Page 119: Automatic Climate Control

    AUTOMATIC CLIMATE CONTROL (1/4) Varying the ventilation speed In automatic mode, the system uses the most suitable amount of air to reach and maintain the desired comfort level. You can still adjust the ventilation speed by turning control 6 to increase or reduce the ventilation speed.
  • Page 120 AUTOMATIC CLIMATE CONTROL (2/4) Clear View function Press button 3 – the integrated indica- tor light comes on. This function quickly demists and de- ices the windscreen, the rear screen, the front side windows, and the door mirrors (depending on the vehicle). The air conditioning and rear screen de-ic- ing functions must be activated.
  • Page 121 AUTOMATIC CLIMATE CONTROL (3/4) Adjusting the distribution Ø The air flow is mainly distrib- uted between the front side of air in the passenger window demisting air vents and the compartment windscreen demisting vents. Press one of the buttons 4. The in- ½...
  • Page 122 AUTOMATIC CLIMATE CONTROL (4/4) Manual use Press button 7 – the integrated indica- tor light comes on. Prolonged use of this position may lead to odours, caused by non-renewal of air, and the formation of condensation on the windows. We therefore advise you to return to au- tomatic mode as soon as air recircula- tion is no longer needed, by pressing button 7.

  • Page 123: Air Conditioning: Information And Advice On Use

    AIR CONDITIONING: information and advice on use Fuel consumption Operating faults You will normally notice an increase in As a general rule, contact your ap- fuel consumption (especially when driv- proved dealer in the event of an oper- ing in town) when the air conditioning is ating fault.

  • Page 124: Electric Windows

    ELECTRIC WINDOWS (1/4) Manual window winders Electric front windows Dashboard switches B Press the bottom of switch 4 or 5 to Turn handle 1 to lower or raise the The electric windows operate with the open the window or press the top of window to the desired height.
  • Page 125 ELECTRIC WINDOWS (2/4) One-touch windows When the vehicle is equipped with this function, the one-touch mode works in addition to the operation of the electric windows described previously. It is only fitted to the driver’s window. – Fully and briefly press down on the relevant switch down: the window will open completely.
  • Page 126 ELECTRIC WINDOWS (3/4) Rear electric windows Rear seat switches D Door switch E With the ignition on, press switch 9 Operate switch 11. Dashboard switches C or 10 to open the window or lift switch 9 With the ignition on, press the bottom or 10 to raise it to the desired height.
  • Page 127 ELECTRIC WINDOWS (4/4) Safety of rear occupants The driver can prevent op- eration of the rear elec- tric windows by pressing switch 12. Driver’s responsibility Never leave your vehicle with the key inside and never leave a child (or a pet) unsupervised, even for a short while.

  • Page 128: Interior Lighting

    INTERIOR LIGHTING Courtesy light Luggage compartment light 4 Press switch 2 for: It comes on when the tailgate or one of the doors is opened – permanent lighting; – intermittent lighting, which comes on when a door is opened. It only switches off after a time delay and when the doors concerned have been closed correctly;...

  • Page 129: Sun Visor/Grab Handle

    SUN VISOR/GRAB HANDLE Front sun visor Sun visor storage 4 Grab handle 5 Lower the sun visor 1 or 3 over the It can be used to hold motorway This offers support and can be held windscreen or unclip it and turn it over passes, etc.
  • Page 130 PASSENGER COMPARTMENT STORAGE, FITTINGS (1/4) Glove box Centre console storage compartment 2 Pull handle 1 to open it. (or radio location) Ensure that no hard, heavy or pointed objects are placed in the “open” storage compartments in such a way that they may fall onto passen- gers during sudden turning, braking or in the event of an accident.
  • Page 131 PASSENGER COMPARTMENT STORAGE, FITTINGS (2/4) Dashboard upper storage Door storage compartment 5 compartment 3 If the storage compartment has a cover, press button 4 to open. Nothing should be placed on the floor area in front of the driver as such objects may slide under the pedal during braking manoeuvres, thus obstructing its use.
  • Page 132 PASSENGER COMPARTMENT STORAGE, FITTINGS (3/4) Storage compartment 6 Central armrest 8 Armrest storage compartment A Location for ashtray 7 Ensure that no hard, heavy Nothing should be placed or pointed objects are on the floor area in front of placed in the “open” storage the driver as such objects compartments in such a may slide under the pedal...
  • Page 133 PASSENGER COMPARTMENT STORAGE, FITTINGS (4/4) Front seat storage pockets 9 Location for cup holder 10 Bag hooks 11 Maximum weight per hook: 5 kg. 3.21...

  • Page 134: Ashtrays, Cigarette Lighter, Accessories Socket

    ASHTRAY/CIGARETTE LIGHTER/ACCESSORIES SOCKET Cigarette lighter 3 Accessories socket 3 With the ignition on, push in the ciga- It is provided for connecting acces- rette lighter 3. It will spring back with a sories approved by our Technical click when it is ready. Pull it out to use. Department with a maximum power of 120 Watts (12V).

  • Page 135: Rear Headrests

    REAR HEADRESTS Position for using headrest A To put the headrest back in place A Lift the headrest to maximum height, then lower it until it locks. Insert the rods in the holes, press button 1, lower the headrest and check that it is securely in place.

  • Page 136: Rear Bench Seat: Functions

    REAR BENCH SEAT: functions (1/2) Depending on the vehicle, the seat and To fold the back B or C To reposition the seat back B the seatback may be folded away to or C – Insert the seat belt buckle of the rear allow bulky objects to be carried.
  • Page 137 REAR BENCH SEAT: operation (2/2) When refitting the seat- back, make sure it is cor- rectly locked in place. If seat covers are fitted, make sure these do not prevent the seatback latch from locking in. Make sure that the seat belts are positioned correctly.

  • Page 138: Boot

    BOOT To open From the inside To close Pull the lever 2, then lift the boot lid. Lower the boot lid using, at first, the Electric central locking handle 3 inside the boot, if fitted to With the opening elements unlocked, the vehicle.

  • Page 139: Luggage Compartment Storage Space And Fittings

    LUGGAGE COMPARTMENT STORAGE SPACE AND FITTINGS Anchorage points Anchorage points 1 located on each Always position the heavi- corner of the luggage compartment est items directly on the allow loads to be secured. floor. If the vehicle is equipped with anchorage points on the luggage compart- ment floor, use them.

  • Page 140: Transporting Objects In The Boot

    TRANSPORTING OBJECTS IN THE BOOT Always position the objects trans- ported so that the largest surface is against: – the rear bench seatbacks, for normal loads (eg: A); – the front seats when the rear seats are folded down. Refer to the infor- mation on the “Rear bench seat: functions”...

  • Page 141: Transporting Objects Towing, Attachments

    TRANSPORTING OBJECTS towing, attachments Four-door version A = 1025 mm Five-door version A = 781 mm Estate version A = 1170 mm Permissible nose weight, maxi- mum permissible towing weight braked and unbraked: Refer to the information on “Weights” in Section 6. Refer to the manufacturer’s instruc- tions for information on how to fit and operate the towing attachments.

  • Page 142: Rear Parcel Shelf

    REAR PARCEL SHELF Five-door version Lift rear parcel shelf 2 slightly and pull it Four-door version towards you. Removal To refit it, proceed in reverse order to Unhook the two cords 1 (tailgate side). removal. Do not place any objects, especially heavy or hard objects, on parcel shelf 2 or 3.
  • Page 143 LUGGAGE COMPARTMENT COVER: estate version This consists of a rigid section (parcel Removing the boot cover shelf A) and a soft section B. When the soft section B has been rolled To remove the flexible section B up, gently lift the parcel shelf A and pull it towards you.

  • Page 144: Transporting Objects Luggage Net

    TRANSPORTING OBJECTS Luggage net (1/2) Estate version Fitting the luggage net behind the – move the cut-out section 2 in the front seats carpet to access the lower mount- Luggage net A ing 6 for the net; Inside the vehicle on each side: If fitted, this can be used when trans- –...
  • Page 145 TRANSPORTING OBJECTS Luggage net (2/2) Fitting the luggage net A behind the – attach the two hooks 10 of the rear bench seat straps 9 from the net onto the an- choring points 11; Inside the vehicle on each side: –...

  • Page 146: Roof Bars

    LONGITUDINAL ROOF BARS If fitted on the vehicle, you can trans- port luggage or additional equipment (bike racks, ski racks, etc): For information on the range of – on a roof rack; equipment adapted to your ve- – on transverse roof bars fitted onto hicle, we advise you to consult the longitudinal roof bars 1;...

  • Page 147: Multimedia Equipment

    MULTIMEDIA EQUIPMENT The presence and location of this Hands-free telephone equipment depends on the vehicle’s integrated control multimedia equipment. On equipped vehicles, use micro- 1 Radio or navigation system phone 3 and steering column control 2. 2 Steering column control; 3 Microphone.
  • Page 148 3.36...
  • Page 149 Section 4: Maintenance Bonnet ............... . Engine oil level: general information .

  • Page 150: Bonnet

    BONNET When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position. Risk of injury. Ensure that the bonnet is properly locked. Ensure that nothing is pre- venting locking (grit, cloths, etc.). To open the bonnet, pull the handle 1. Opening the bonnet Lift the bonnet;...

  • Page 151: Engine Oil Level: General Information

    ENGINE OIL LEVEL: general information It is normal for an engine to use oil for – remove the dipstick and wipe with a lubrication and cooling of moving parts clean, lint-free cloth; and it is normal to top up the level be- –...

  • Page 152: Engine Oil Level: Topping Up, Filling

    ENGINE OIL LEVEL: topping up, filling (1/3) Topping up/Filling – Unscrew cap 1; – top up the level (as a guide, the ca- The vehicle must be parked on level pacity between the minimum and ground and the engine should be cold maximum reading on the dipstick 2 (for instance, before the engine is is between 1.5 and 2 litres, depend-...
  • Page 153 ENGINE OIL LEVEL: topping up, filling (2/3) Do not exceed the max level and do not forget to refit cap 1 and dip- stick 2. Topping up/Filling – Unscrew cap 1; – top up the level (as a guide, the ca- The vehicle must be parked on level pacity between the minimum and ground and the engine should be cold...

  • Page 154: Oil Change

    ENGINE OIL LEVEL: topping up, filling (3/3) Oil change Never run the engine in an Service interval: refer enclosed space as exhaust Maintenance Document for your vehi- gases are poisonous. cle. Oil change capacity Please refer to the maintenance docu- ment for your vehicle, or contact an au- thorised dealer.

  • Page 155: Levels

    LEVELS (1/4) Level Topping up After any operation on the hydraulic cir- It is normal for the level to drop as the cuit, a specialist must replace the fluid. brake shoes become worn, but it must Only use fluids approved by the never drop lower than the “MINI”...
  • Page 156 LEVELS (2/4) Checking intervals Check the coolant level regularly Consult an approved dealer at once (very severe damage is likely to be if you notice an abnormal or re- caused to the engine if it runs out of peated drop in any of the fluid levels. coolant).

  • Page 157: Windscreen Washer Reservoir

    LEVELS (3/4) Windscreen washer Topping up With the engine switched off, open the cap 3 or 4. Fill until you can see the fluid, then replace the cap. This reservoir supplies the front and rear headlight screen washers (if the vehicle is equipped with them).

  • Page 158: Power-Assisted Steering Fluid

    LEVELS (4/4) FILTERS Filters The replacement of filter elements (air filter, cabin filter, diesel fuel filter, etc.) is scheduled in the maintenance opera- tions for your vehicle. Replacement intervals for filter ele- ments: please refer to your vehicle’s maintenance document. Power-assisted steering fluid 5 or 6 If you feel any variation in the ef-...

  • Page 159: Battery

    BATTERY The charge status of your battery can decrease especially if you use your ve- hicle: – for short journeys; – for driving in town; – when the temperature drops; – after extended use of consumers (radio etc.) with the engine switched off.

  • Page 160: Tyre Pressure

    TYRE PRESSURE E: front tyre pressure. F: rear tyre pressure. G: tyre pressure for the emergency spare wheel. Special note concerning fully laden vehicles (Maximum Permissible All-Up Weight) and towing a trailer: the maxi- mum speed must be limited to 60 mph (100 kph) and the tyre pressure in- creased by 0.2 bar.

  • Page 161: Bodywork Maintenance

    BODYWORK MAINTENANCE (1/2) A well-maintained vehicle will last What you should not do You should longer. It is therefore recommended to Do not degrease or clean mechani- Wash your car frequently, with the maintain the exterior of the vehicle reg- cal components (e.g.
  • Page 162 BODYWORK MAINTENANCE (2/2) Respect local regulations about wash- Vehicles with a matte paint Using a roller type car wash ing vehicles (e.g. do not wash your ve- finish Return the windscreen wiper stalk to hicle on a public highway). the Park position (refer to the informa- This type of paint requires certain pre- Observe the vehicle stopping distances tion on the “Windscreen washer, wiper”...

  • Page 163: Interior Trim Maintenance

    INTERIOR TRIM MAINTENANCE (1/2) A well-maintained vehicle will last Glass instrument panel Textiles (seats, door trim, etc) longer. It is therefore recommended to (e.g. instrument panel, clock, exterior Vacuum-clean the textiles regularly. maintain the interior of the vehicle regu- temperature display, radio display, etc.) larly.

  • Page 164: The Vehicle

    INTERIOR TRIM MAINTENANCE (2/2) Removal/replacing removable You should not: equipment originally fitted in You are strongly advised not to po- the vehicle sition objects such as deodorants, scents, etc. near air vents, as this could If you need to remove equipment in damage your dashboard trim.
  • Page 165 Section 5: Practical advice Puncture, emergency spare wheel ..........Tyre inflation kit .

  • Page 166: Puncture, Emergency Spare Wheel

    PUNCTURE, EMERGENCY SPARE WHEEL – lift the luggage compartment carpet vertically against the rear seatback or the folded boot cover, if your vehi- NB: ensure that the emergency cle has one; spare wheel or punctured wheel and – unscrew the central mounting 1; the wheel tray are correctly posi- –...
  • Page 167 TYRE PRESSURE KIT (1/3) Do not attempt to use the The kit is only approved for inflation kit if the tyre has inflating the tyres of the ve- been damaged as a result hicle originally equipped of driving with a puncture. with the kit.
  • Page 168 TYRE PRESSURE KIT (2/3) With the engine running and the – after a maximum of 15 minutes, stop parking brake applied, inflating and read the pressure (on pressure gauge 5). – unroll the hose from the container; Note: while the container is empty- –...
  • Page 169 TYRE PRESSURE KIT (3/3) – Affix the driving recommendation Precautions when using the label to the dashboard where it can easily be seen by the driver; The kit should not be operated for more – Put the kit away. than 15 consecutive minutes. –...

  • Page 170: Tools

    TOOLS (1/2) Never leave tools unse- cured in the vehicle: there is a risk that they may be thrown about during brak- ing. After use, make sure the tools are correctly positioned in their housings: there is a risk of injury. If wheel bolts are supplied in the tool kit, only use these bolts for the emergency spare wheel: refer to the...
  • Page 171 TOOLS (2/2) Hubcap tool 2 Tow eye 3 Wheelbrace 4 Removes the wheel hubcaps. Please see “Towing: breakdown recov- Allows the wheel bolts to be locked/un- ery” in Section 5. locked. Never leave tools unsecured in the vehicle: there is a risk that they may be thrown about during braking.
  • Page 172 WHEEL TRIM - WHEELS Central wheel trim with Central wheel trim with Wheel trim with concealed visible wheel bolts concealed wheel bolts wheel bolts (example: wheel trim 1) (example: wheel trim 4) (example: wheel trim 6) Remove the wheel trim using the The bolts are directly accessible.

  • Page 173: Changing A Wheel

    CHANGING A WHEEL (1/2) Vehicles equipped with a jack Offer up the jack 4 horizontally; the jack head must be lined up with the sill 1, and wheelbrace closest to the wheel concerned, as If necessary, remove the hubcap. shown by arrow 2. Use the wheelbrace 3 to slacken off Crank up the jack 4 by hand at first to the wheel bolts.
  • Page 174 CHANGING A WHEEL (2/2) Undo the bolts and take off the wheel. Fit the emergency spare wheel on the central hub and turn it to locate the mounting holes in the wheel and the hub. If bolts are supplied with the emergency spare wheel, only use these bolts for the emergency spare wheel.

  • Page 175: Tyres (Tyre And Wheel Safety, Use In Winter)

    TYRES (1/3) Tyre and wheel safety When the tyre tread has been worn to the level of the warning strips, they The tyres are the only contact between become visible 2: it is then neces- the vehicle and the road, so it is essen- sary to replace your tyres because the tial to keep them in good condition.

  • Page 176: Tyre Pressures

    TYRES (2/3) Tyre pressures Pressures should be checked when the Changing wheels around tyres are cold; ignore higher pressures Adhere to the tyre pressures (including This practice is not recommended. which may be reached in hot weather the emergency spare wheel). The tyre or following a fast journey.
  • Page 177 TYRES (3/3) Use in winter Snow or Winter tyres We would recommend that these be Chains fitted to all four wheels to ensure that For safety reasons, fitting snow your vehicle retains maximum adhe- chains to the rear axle is strictly for- sion.

  • Page 178: Front Lights: Changing Bulbs

    FRONT LIGHTS: changing bulbs (1/2) Daytime running light, front side light Remove cover B.. Turn the bulb holder 2 a quarter of a turn and take out the bulb. Bulb type: W21/5W. Direction indicator lights Turn the bulb holder 3 a quarter of a turn and take out the bulb.
  • Page 179 FRONT LIGHTS: changing bulbs (2/2) Daytime running light, front side light Remove cover E and remove the bulb 9. Bulb type: W21/5W LL. Direction indicator lights Turn the bulb holder 6 a quarter of a turn and take out the bulb. Bulb type: PY21W.

  • Page 180: Fog Lights: Changing Bulbs

    FOG LIGHTS: changing bulbs Additional lights To comply with local legislation, or If you wish to fit fog lights to your ve- as a precaution, you can obtain an hicle, please see an authorised dealer. emergency kit containing a set of spare bulbs and fuses from an ap- proved Dealer.

  • Page 181: Rear And Side Lights: Changing Bulbs

    REAR AND SIDE LIGHTS: changing bulbs (1/7) Four-door version Unclip the bulb holder using tabs 3. 4 Side light and brake light Bulb type 4: P21/5W. Rear side lights and stop light, 5 Indicator light indicator lights and fog lights Bulb type 5: PY21W.
  • Page 182 REAR AND SIDE LIGHTS: changing bulbs (2/7) Four-door version (cntd.) Turn the bulb holder 9 a quarter of a turn, release it and remove the bulb. Bulb type: P 21 W. High-level brake light 8 Refitting The bulb for the high-level brake light 8 can be accessed through the boot.
  • Page 183 REAR AND SIDE LIGHTS: changing bulbs (3/7) Five-door version Unclip the bulb holder using tabs 12. 13 Side light and brake light Bulb type 13 :P21/5W. Rear side lights and stop light, 14 Indicator light indicator lights and fog lights Bulb type 14 :PY21W.
  • Page 184 REAR AND SIDE LIGHTS: changing bulbs (4/7) Estate version Unclip the bulb holder using tabs 21. 22 Side light and brake light Bulb type 21: P21/5W. Rear side lights and stop light, 23 Indicator light indicator lights and fog lights Bulb type 22: PY21W.
  • Page 185 REAR AND SIDE LIGHTS: changing bulbs (5/7) Five door and estate versions Turn the bulb holder 28 a quarter of a turn, release it and remove the bulb. (ctd.) Bulb type: P 21 W. High-level brake light 26 The bulb for the high-level brake light 26 can be accessed through the boot.
  • Page 186 REAR AND SIDE LIGHTS: changing bulbs (6/7) Four and five door versions Estate version Unclip the light 29 by pressing tab Number plate lights 29 using a flat-blade screwdriver or similar. Unclip the light 29 by pressing tab 30 Remove the light cover to gain access (using a flat-blade screwdriver or simi- to the bulb.
  • Page 187 REAR AND SIDE LIGHTS: changing bulbs (7/7) Side indicator lights 31 Side indicator lights 33 Unclip the indicator light 31 (using a Unclip indicator light 33 using a flat- flat-blade screwdriver or similar). blade screwdriver type tool positioned at A to move the indicator light towards Turn the bulb holder 32 a quarter of a the front of the vehicle.
  • Page 188 INTERIOR LIGHTING: changing bulbs (1/2) Four and five door versions Five-door version Press tab 3 to release the lens 5 and access bulb 4. Courtesy light Luggage compartment light Bulb type: W5W. Unclip the lens (using a flat-blade Unclip light 2 by pressing the tabs on screwdriver or similar).
  • Page 189 INTERIOR LIGHTING: changing bulbs (2/2) Four-door version Disconnect the light 7. Press tab 8 to release the lens 10 and access bulb 9. Luggage compartment light Bulb type: W5W. Unclip light 6 using a flat-blade screw- driver or similar, by pressing on the tab to move the light towards the inside of the luggage compartment.

  • Page 190: Fuses

    FUSES (1/4) Passenger compartment fuses A Clip 1 If any electrical component does not Remove the fuse using tweezers 1, lo- work, check the condition of the fuses. cated at the back of flap A. Unclip flap A using notch 1 to help you. To remove the fuse from the tweezers, slide the fuse to the side.
  • Page 191 FUSES (2/4) Fuses in engine compartment B Special features of LPG versions Some functions are protected by fuses The specific LPG 2 circuit shut-off fuse located in the engine compartment is located in the box B. (unit B). However, because of their reduced Check the fuse in question accessibility, we advise you to have and replace it, if necessary,...
  • Page 192 FUSES (3/4) Allocation of fuses in the passenger compartment (the presence of certain fuses DEPENDS ON THE VEHICLE EQUIPMENT LEVEL) 5.28...
  • Page 193 FUSES (4/4) Number Allocation Number Allocation Number Allocation Empty location ABS-ESC, brake switch Power-assisted steering Driver’s side window Interior lights, window Location reserved for winder winder, air conditioning, and 28 additional equipment. C to J Empty spaces boot light Direction indicator lights Front electric window Passenger compartment Reverse gear, windscreen...

  • Page 194: Battery

    RADIO FREQUENCY REMOTE CONTROL: batteries Replacing the remote control Replace battery 2 according to the di- rection marked on the cover. battery Note: It is not advisable to touch the Undo screw 1 to remove the remote electronic circuit in the key cover when control cover.

  • Page 195: Connecting A Battery Charger

    BATTERY: troubleshooting (1/2) To avoid all risk of sparks: Connecting a battery charger – Ensure that any consumers (cour- The battery charger must be com- tesy lights, etc.) are switched off patible with a battery with nominal before disconnecting or reconnect- voltage of 12 volts.
  • Page 196 BATTERY: troubleshooting (2/2) Starting the vehicle using the battery from another vehicle If you have to use the battery from an- other vehicle to start, obtain suitable jump leads (with a large cross section) from an approved dealer or, if you al- ready have jump leads, ensure that they are in perfect condition.

  • Page 197: Wiper Blades

    WIPER BLADES Check the condition of the wiper blades. You are responsible for their service life: – clean the blades, windscreen and rear screen regularly with soapy water; – do not use them when the wind- screen or rear screen are dry; –...
  • Page 198 TOWING: breakdown (1/2) The steering wheel must be un- – Use a rigid towing bar. locked and the ignition key must be If a rope or cable is used in position M (ignition on) to provide (where the law allows this), brake lights and hazard warning the vehicle being towed lights on the towed vehicle.
  • Page 199 TOWING: breakdown (2/2) Only use the front 1 and rear 5 Access to towing points towing points. Unclip cover 3 or 4 by inserting a flat- These towing points may only be used blade screwdriver or similar under the for towing: never use them for lifting the cover.
  • Page 200 FITTING A RADIO If your vehicle is not fitted with an audio Location for front 2 or rear system, one can be fitted and locations speaker 3 have been provided for: Unclip cover 2 or 3 using a flat-blade – the radio 1; screwdriver or similar.

  • Page 201: Accessories

    ACCESSORIES Electrical and electronic accessories Before installing this type of accessory (particularly for transmitters/receivers: frequency bandwidth, power level, po- sition of the aerial, etc.), make sure it is compatible with your vehicle. You can get advice from an authorised dealer. Connect accessories with a maximum power of 120 watts only.

  • Page 202: Operating Faults

    OPERATING FAULTS (1/5) The following advice will enable you to carry out quick, temporary repairs. For safety reasons you should always contact an approved dealer as soon as possible. The starter is activated POSSIBLE CAUSES WHAT TO DO Warning lights dim or fail to come on; Battery terminals disconnected, Retighten them, reconnect them or clean the starter does not run.
  • Page 203 OPERATING FAULTS (2/5) On the road POSSIBLE CAUSES WHAT TO DO Vibrations. Tyres not inflated to correct pres- Check the tyre pressures; if this is not the cause, have sures, incorrectly balanced or their condition checked by an approved dealer. damaged.
  • Page 204 OPERATING FAULTS (3/5) On the road POSSIBLE CAUSES WHAT TO DO Abnormal white smoke from the ex- Mechanical fault: damaged cylinder Stop the engine. haust head gasket. Contact an approved dealer. This is not necessarily a fault. Please refer to the information on “Special Smoke may be caused by features of diesel versions”...
  • Page 205 OPERATING FAULTS (4/5) On the road POSSIBLE CAUSES WHAT TO DO Whistling Roof aerial poorly positioned. Position the aerial. The engine overheats. The coolant Engine cooling fan not working. Stop the vehicle, switch off the engine and temperature indicator light comes contact an approved dealer.
  • Page 206 OPERATING FAULTS (5/5) Electrical equipment POSSIBLE CAUSES WHAT TO DO The wipers do not work. Wiper blades stuck. Free the blades before using the wipers. Faulty electrical circuit. Consult an approved dealer. The wiper does not stop. Faulty electrical controls. Consult an approved dealer.
  • Page 207 Section 6: Technical specifications Vehicle identification plates ............Engine identification plate .

  • Page 208: Vehicle Identification Plates

    VEHICLE IDENTIFICATION PLATES The information shown on the ve- 4 MAM (Maximum Authorised hicle identification plate should be Mass). quoted on all correspondence or 5 GTW (Gross train weight: vehicle orders. fully loaded, with trailer). 6 MPAW (Maximim Permissible The presence and location of the in- Weight) for front axle.

  • Page 209: Engine Identification Plate

    ENGINE IDENTIFICATION PLATES (1/2) Quote the information on the identi- fication plate or label A in all corres- pondence or when ordering parts. (Location varies depending on engine) 1 Engine type. 2 Engine suffix. 3 Engine number.
  • Page 210 ENGINE IDENTIFICATION PLATES (2/2) Quote the information on the identi- fication plate or label A in all corres- pondence or when ordering parts. (Location varies depending on engine) 1 Engine type. 2 Engine suffix. 3 Engine number.

  • Page 211: Engine Specifications

    ENGINE SPECIFICATIONS Versions 0.9 TCe 1.2 16V 1.6 16V 1.5 dCi Engine type H4B Turbo K9K Turbo (see engine plate) Cubic capacity (cc) 1 149 1 598 1.461 The use of unleaded petrol is essential, with the octane rating Diesel as stated on the label inside the fuel filler flap.

  • Page 212: Dimensions

    DIMENSIONS (in metres) (1/3) 1.497 0.818 2.634 0.894 1.994 4.346 1.543 (*) 1.486 (*) unladen...
  • Page 213 DIMENSIONS (in metres) (2/3) 0.818 0.650 1.497 2.589 0.835 (1) 0.656 (1) 1.994 4.057 4.080 (1) 1.523 (2) 1.618 (3) 1.486 (1) depending on vehicle (2) unladen, without roof bars (3) unladen, with roof bars...
  • Page 214 DIMENSIONS (in metres) (3/3) 1.497 0.818 2.634 1.042 1.994 4.494 1.519 (1) 1.550 (2) 1.486 (1) unladen, without roof bars (2) unladen, with roof bars...

  • Page 215: Weights (In Kg)

    WEIGHTS (in kg) (1/3) The weights indicated are for a basic vehicle without options: they vary depending on the your vehicle’s equipment. Consult an approved Dealer Four-door version Maximum permissible all-up weight (MMAC) Weights indicated on the manufacturer’s plate (refer Maximum permissible all-up weight (MMTA) to Section 6 “Vehicle identification plate”) Gross Train Weight (MTR)
  • Page 216 WEIGHTS (in kg) (2/3) The weights indicated are for a basic vehicle without options: they vary depending on the your vehicle’s equipment. Consult an approved dealer. Five-door versions Maximum permissible all-up weight (MMAC) Weights indicated on the manufacturer’s plate (refer Maximum permissible all-up weight (MMTA) to Section 6 “Vehicle identification plate”) Gross Train Weight (MTR)
  • Page 217 WEIGHTS (in kg) (3/3) The weights indicated are for a basic vehicle without options: they vary depending on the your vehicle’s equipment. Consult an approved dealer. Estate versions Maximum permissible all-up weight (MMAC) Weights indicated on the manufacturer’s plate (refer Maximum permissible all-up weight (MMTA) to Section 6 “Vehicle identification plate”) Gross Train Weight (MTR)

  • Page 218: Replacement Parts And Repairs

    REPLACEMENT PARTS AND REPAIRS Original parts are based on strict specifications and are subject to highly-specialised tests. Therefore, they are of at least the same level of quality as the parts fitted originally. If you always fit genuine replacement parts to your vehicle, you will ensure that it performs well. Furthermore, repairs carried out within the manufacturer’s Network using original parts are guaranteed according to the conditions set out on the reverse of the repair order.

  • Page 219: Service Sheets

    SERVICE SHEETS (1/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □ ........Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □...
  • Page 220 SERVICE SHEETS (2/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □ ........Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □...
  • Page 221 SERVICE SHEETS (3/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □ ........Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □...
  • Page 222 SERVICE SHEETS (4/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □ ........Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □...
  • Page 223 SERVICE SHEETS (5/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □ ........Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □...
  • Page 224 SERVICE SHEETS (6/6) VIN: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □ ........Anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: Stamp □ Service □...

  • Page 225: Anticorrosion Check

    ANTICORROSION CHECK (1/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.19...
  • Page 226 ANTICORROSION CHECK (2/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.20...
  • Page 227 ANTICORROSION CHECK (3/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.21...
  • Page 228 ANTICORROSION CHECK (4/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.22...
  • Page 229 ANTICORROSION CHECK (5/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.23...
  • Page 230 ANTICORROSION CHECK (6/6) If the continuation of the warranty is subject to repair, it is indicated below. VIN: ............Corrosion repair operation to be carried Stamp out: Date of repair: Repair to be carried out: Stamp Date of repair: Repair to be carried out: Stamp Date of repair: 6.24...
  • Page 231 ALPHABETICAL INDEX (1/5) child booster seat ..........1.26 → 1.28 child restraint/seat ..........1.26 → 1.41 accessories................ 5.37 child safety........1.2, 1.4, 1.9, 1.26 → 1.41 accessories socket ............3.22 child seats..............1.26 → 1.38 additional methods of restraint .......... 1.25 adjusting your driving position ......1.14 → 1.19, 3.23 cigar lighter ................

  • Page 232: Maintenance

    ALPHABETICAL INDEX (2/5) fuel tank ..............1.64 → 1.68 emergency braking ..........2.20 → 2.23 emergency spare wheel .........5.2, 5.11 → 5.13 fuel tank capacity ............... 1.64 fuses ..............5.26 → 5.29 engine technical specifications ..........6.5 engine coolant ..............4.8 gear lever................2.9 engine immobiliser (switch) ..........

  • Page 233: Practical Advice

    ALPHABETICAL INDEX (3/5) maintenance: jack ............5.6 – 5.7, 5.9 – 5.10 bodywork ............4.13 – 4.14 interior trim ............4.15 – 4.16 mechanical ......4.3, 4.7 → 4.10, 6.13 → 6.18 keys ................1.2 → 1.4 map reading lights ............. 3.16 methods of restraint in addition to the front seat belts ....

  • Page 234: Technical Specifications

    ALPHABETICAL INDEX (4/5) radio frequency remote control/key starting the engine ............... 2.3 use ................1.2, 1.4 steering wheel rear bench seat..............3.25 adjustment ..............1.13 storage compartment..........3.18 → 3.21 rear parcel shelf ..............3.30 storage compartments ........3.18 → 3.21, 3.27 rear screen demisting ..............

  • Page 235: Alphabetical Index

    ALPHABETICAL INDEX (5/5) vehicle identification ............6.2 vehicle identification plates ......... 6.2 – 6.3 ventilation ..............3.7 → 3.10 heating and air conditioning system ...3.4 → 3.6, 3.11 warning buzzer ..........1.8 – 1.9, 1.57 warning lights........1.46 → 1.49, 1.52 → 1.56 washing ..............
  • Page 237 ELF, THE EXCLUSIVE PARTNER FOR MY DACIA DACIA RECOMMENDS ELF LUBRICANTS...
  • Page 238 Ref 999103270R / édition anglaise www.daciagroup.com NU 993-5 - 05/2014...

This manual is also suitable for:

2014 logan mcv

Table of Contents

Save PDF