Saw Blade - Makita 5090D Instruction Manual

SAW BLADE
CAUTION: Always be sure that the tool is switched off
and the battery cartridge
is
removed before installing or removing the blade.
Use only the Makita hex wrench to remove and install the blade.
Removing Saw Blade
To
remove the blade:
1. Press the blade stopper pin and
insert it through the hole in the
blade so that the blade cannot
revolve.
2. Use the hex wrench to loosen the
bolt.
3. Remove the bolt, flange, and
blade.
Installing Saw Blade
To install the blade:
1. Place the blade over the spindle,
With teeth pointina up a t the front
of the tool.
2. Place the flange over the blade.
3. Insert bolt into blade and flange.
4. Press the blade stopper pin and
insert it through the hole in the
blade so that the blade cannot
revolve.
I
I
5. Use the hex wrench to tighten the bolt, flange, and blade in place.
BE SURE TO TIGHTEN THE BOLT SECURELY.
Hex Wrench Storage
When not in use, the hex wrench can
be conveniently stored.
11