Mitsubishi Electric G-50A Operation Manual page 29

Date and time
Basic system
Groups
Initial setting
Interlocked LOSSNAY
Blocks
E-Mail
Functions1
Peak cut
Set temperature range limit
Functions2 Night mode schedule
Auto-changeover
(4) Click [Save Settings] to send setting data to the G-50A.
Table 7-1 Available Function List
Function
*1
Group name
Group structure
*1
Block name
Block structure
*1
Control method
System structure
*1: At factory shipment, the operation of the building manager is prohibited.
Current date and time setting
G-50A network setting, external output setting
Group name setting
Connection setting of indoor units, remote controllers
*1
and system controllers in a group
Connection setting of interlocked LOSSNAY
Block name setting
*1
Registration setting of groups in a block
Address to report an error mail, Setting of mail
communication partner
Setting of average
temperature difference between set point an
inlet, and control method of indoor units and
outdoor units
*1
PLC initialize, PLC settings
Temperature operating range limitation setting
Night mode time interval setting
Auto-changeover of cooling and heating
28
Content
electric range,