Side Panels; Optional Accessory - Miele F 1803 Vi Installation Instructions Manual

Hide thumbs Also See for F 1803 Vi:
Table of Contents

Advertisement

Installation

Side panels

If one side of the appliance is visible, a
side panel must be used.
The side panel must be firmly secured
to the wall, the floor and the overhead
furniture/fixtures before the appliance is
placed in the cavity.
The dimensions of the side panel are
taken from the opposite wall of the
installation space. During installation,
ensure that the cavity is square and the
measurements are correct.
52
Front panel gap kit

(optional accessory)

Two adjacent doors can be attached
instead of one large door.
To connect these doors on the rear, a
metal strip can be purchased as an
optional accessory. Contact Miele.
When attaching the metal strip to the
furniture doors, observe the maximum
length of the screws and the position of
the drill holes.
Always screw into the best possible
load-bearing material of the custom
doors.

Advertisement

Table of Contents
loading

This manual is also suitable for:

F 1813 viF 1903 viF 1913 vi

Table of Contents