Features; Assembly - Craftsman 315.CH2030 Operator's Manual

PRODUCT SPECIFICATIONS
Battery Pack Voltage ............................................................................................................................ 12 Volt - 19.2 Volt DC
Charger Input........................................................................................................................................ 120 V, AC only, 60 Hz
KNOW YOUR CHARGER
See Figure 1, page i.
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual. Before use of this product, familiarize yourself
with all operating features and safety rules.
DIAGNOSTIC FEEDBACK
LEDs provide feedback to indicate whether the battery
pack is charging, fully charged, or defective.
MULTI-CHEMISTRY
The battery charger can charge either lithium-ion or
nickel-cadmium batteries.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.

FEATURES

ENERGY SAVE MODE
Energy Star qualified systems enter Energy Save Mode
when not charging or when maintaining batteries. This al-
lows the charger to conserve energy by charging batteries
only as needed, and also protects the cells and maximizes
the life of your batteries.
ENERGY STAR QUALIFIED
This battery charger meets the Energy Star energy-
efficiency guidelines set by the U.S. Environmental
Protection Agency and the U.S. Department of Energy.
Battery chargers meeting this standard use an average of
35% less energy than conventional battery chargers.
KEY HOLE HANGER
The charger has a key hole hanging feature for conve-
nient, space saving storage. Screws should be installed
so that the center distance is 4-1/8 in.

ASSEMBLY

PACKING LIST
Charger
Operator's Manual
WARNING:
not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING:
or create accessories not recommended for use with
this product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
5 — English
If any parts are damaged or missing do
Do not attempt to modify this product