Software Update Via Usb Interface - TechniSat DIGIT ISIO STC Quick Start Manual

17 Software update via USB interface

In addition to the automatic software updates via the Internet and DVB sources, you have
the option of updating the receiver's software via the USB interface and the SD / MMC card
reader.
To be able to run the software update via the USB interface or the SD / MMC card
reader, you first need to download the current software version from the
Technisat homepage (www.technisat.de).
The update can be performed with standard USB Flash Sticks and SD / MMC cards
that are formatted in FAT32 format.
> Now copy the software file with the extension ".cpad" onto the Stick or the SD / MMC
card.
If you only want to perform a single update, now also copy the singleupdate or for
>
multiple updates the autoupdate file onto the USB stick or the SD / MMC card.
Please note that the singleupdate and autoupdate files have no
file extension! Please also take note of your PC's folder settings for hiding file
extensions.
The USB stick or SD / MMC card should not contain multiple cpad
software files. In addition, the "autoupdate" and
"singleupdate" files should not both be present at the same time.
> Now switch the receiver to standby and insert the USB flash stick into a USB port or
the SD / MMC card into the SD / MMC card reader on the receiver. Now switch the
receiver on.
The update procedure will now be displayed, with the following steps.
The message "Loading software from data medium" appears
-
- A progress bar then appears showing the loading of the software.
- Once the software is 100% loaded, additional
progress bars appear, one showing the progress of the individual update steps
and the other the overall update progress.
The display shows the progress of the loading of the software and the individual
update steps.
> When the update is complete the TV picture appears again. The receiver can now be
switched to standby and the USB stick or the SD / MMC card removed.
The update should not be interrupted at any stage by extracting the USB stick or the
SD / MMC card, or by cutting off the power supply, as this can cause the receiver to
malfunction.
54