Pioneer N-50 Service Manual page 31

5
Notes on assembling
[1] Styling of cables
(1) FFC between the LCD/KEY ASSY and CNT
B ASSY
Make FFC not to touch with the LCD/KEY
ASSY by folding the base of auxiliary plate
located at the CNT B ASSY at a right angle.
(2) Secondary Side Cable of the Power Trans
( N-50/CUXE: 8200570300120-IL)
( N-50-K/SYXE8, N-50-S/SYXE8:
8200570300130-IL
Put down the Cable not to touch with the
Cabinet.
(3) Primary Side Cable of the Power Trans
( N-50/CUXE: 8200570300120-IL)
N-50-K/SYXE8, N-50-S/SYXE8:
(
8200570300130-IL
Make some Cable extra length by pulling the
Cable lightly toward the Power Trans side
not to touch with the Cabinet after fixing the
Cable with the PCB Binder of POWER SW
ASSY.
Securely fix the Cable with insulated the
PCB Binder of GUIDE 4 ASSY not to touch
with the Cabinet.
Fixing with PCB Binder
GUIDE 4 ASSY
[Case of N-30, N-30-K/-S]
5
6
)
)
DAC ASSY
Fixing with Binder
POWER SW ASSY
Extra length
N-50
6
7
Detached
Folding right angled
LCD/KEY ASSY
Power Trans
Detached
Secondary Side Cable of
Power Trans
Put down
Make the Cabinet not to touch with
Primary Side Cable of
Power Trans
Secondary Side Cable of
Power Trans
Fixing with PCB Binder
GUIDE 4 ASSY
7
8
CNT B ASSY
Power Trans
Pull lightly
31
8
A
B
C
D
E
F