Key Set Button Function Setting Display - Mitsubishi Electric CP910E Operation Manual

ADJUSTMENTS & SETTINGS (SERVICE MENU)

KEY SET Button function setting display

KEY LOCK Makes the function of the remote control unit buttons invalid.
OFF All buttons on the remote control unit are available.
ON The function on the remote control unit buttons, except MEMORY,
PRINT, MONITOR and MEMORY PAGE are not available. When
pressing MENU button, KEY SET menu is displayed. When
pressing MENU button, only selecting OFF/ON of KEY LOCK is
available.
MEM&PRN (Memory and Print)
When pressing MEMORY button, the image is automatically printed
after the image is stored in the memory. In case of multi-image of
different scenes, printing will be done after the last image is stored
in memory.
OFF MEMORY button functions individually. The image is memorized
without printing.
ON Automatically prints after memorizing.
R1 When a signal inputted through a memory key (pin No. 2) of the
remote terminal on the rear panel is switched to "low" level from
"high" for the first time, a memory image is displayed. Then at the
second time, a source image is displayed without printing the
memory image.
R2 On the KEEP MONI OFF status, when a signal inputted through a
memory key (pin No. 2) of the remote terminal is switched to "low"
level from "high" for the first time, a memory image is displayed.
Then at the second time, a source image is displayed and the
memory image is printed.
Do not change the MULTI setting after memorizing an image.
MEM&STOP (Memory and Stop)
OFF The next image is overlaid in the memory.
PART The next image can not be overlaid in the memory when all parts of
a page become full. To overlay a new image, print the memorized
image.
PAGE The next image can not be overlaid in the memory when all pages
become full. To overlay a new image, print the memorized image.
MEM&MONI (Memory and Monitor)
Switches the monitor display between the source image and
memory image after memorizing.
OFF Displays the source image.
ON Displays the memory image. (Initial setting)
• When KEEP MONI is set to OFF, the source image will be displayed when
starting printing.
KEEP MONI Selects the image displayed on the monitor during printing.
OFF Displays the source image after starting printing.
ON Displays the source image after starting printing, when indicating it
before printing. Displays the memory image after starting printing,
when indicating it before printing.
AUTO CLEAR
OFF The printed memory image is not cleared.
MEM When MULTI is set to ON, the memory image is cleared after
memorizing on the printed memory page again.
AFT. PRN The printed memory image is cleared after completing printing.
• For continuous printing, the stored images are cleared by above settings after completing
printing of set numbers of print.
CLEAR KEY
PART Pressing CLEAR button on the remote control unit, the selected
one MULTI image is cleared.
PAGE Pressing CLEAR button on the remote control unit, images of the
memorized page being selected are cleared.
ALL Pressing CLEAR button on the remote control unit, all of the stored
images are cleared.
42
KEY SET
KEY LOCK OFF/ON
MEM&PRN OFF/ON/R1/R2
MEM&STOP OFF/PART/PAGE
MEM&MONI OFF/ON
KEEP MONI OFF/ON
AUTO CLEAR OFF/MEM/AFT. PRN
CLEAR KEY PART/PAGE/ALL
R1
Source
Display Memory
Remote terminal input
Memorizing
R2 (When KEEP MONI : OFF)
source Memory
Display
Remote terminal input
Memorizing
MEM&MONI : OFF
About 2 seconds
Display SOURCE MEMORY SOURCE
MEMORY
MEM&MONI : ON
KEEP MONI : OFF
Display SOURCE MEMORY SOURCE
PRINT
MEMORY
MEM&MONI : ON
KEEP MONI : ON
SOURCE MEMORY
Display
MEMORY PRINT
source
Not printing
source
Printing