Ross RAAC2/24 Instructions For Installation, Use And Maintenance Manual

Ross RAAC2/24 Instructions For Installation, Use And Maintenance Manual

Advertisement

RAAC2/24 and RAAC2.5/36
Direct drive electric air compressors
RAAC2/24 and RAAC2.5/36
General instruction for installation use and maintenance
Protect yourself and others by observing all safety information, warnings, and
cautions. Failure to comply with instructions could result in personal injury
and/or damage to product or property.
Please retain instructions for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RAAC2/24 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ross RAAC2/24

  • Page 1 RAAC2/24 and RAAC2.5/36 Direct drive electric air compressors RAAC2/24 and RAAC2.5/36 General instruction for installation use and maintenance Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property.
  • Page 2: Warranty

    RAAC2/24 and RAAC2.5/36 Warranty This product has been manufactured to a high quality standard. It is guaranteed against faulty materials and workmanship for 12 months from the date of purchase. Please retain your receipt as proof of purchase. If the product is found to be defective within the relevant time period, we will either replace all defective parts or, at our discretion, replace the unit free of charge with the same item or items of a greater value and/or specification.
  • Page 3 RAAC2/24 and RAAC2.5/36 GENERAL SAFETY INSTRUCTIONS Before attempting to operate this compressor the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. It is important to read the instruction manual to understand the application, limitations and potential hazards associated with any tool.
  • Page 4 RAAC2/24 and RAAC2.5/36 Secure the Work Piece Wherever possible secure the work piece using clamps or a vice. It is safer than using your hand and leaves both hands free to control the air tool. Do Not Over-reach Do not over-reach, keep proper footing and maintain your balance at all times.
  • Page 5 RAAC2/24 and RAAC2.5/36 Extension Cords and Reels In general, it is not recommended to use an extension lead. A longer air line is recommended as voltage drop on extension leads may lead to motor damage and will void warranty. If a exten- sion cord must be used, for lengths up to 5 metres, an approved 15amp rated cord must be used.
  • Page 6: General View And Main Components

    RAAC2/24 and RAAC2.5/36 GENERAL VIEW AND MAIN COMPONENTS Main compressor ⑴ Pressure switch ⑵ Outlet Valve ⑶ Regulating Valve ⑷ 2HP/24L Pressure gauge ⑸ Non-Return Valve ⑹ Drain cock ⑺ Wheel ⑻ Discharge pipe ⑼ Air tank ⑽ Safety valve ⑾...
  • Page 7 RAAC2/24 and RAAC2.5/36 Assembly This air compressor requires some minor assemble before it can be used. Locate the accessory pack. It should contain : Wheels and axle set Rubber stopper Air Filter Oil Breather plug A bottle of oil Fit the wheels to the unit using the axle kit •...
  • Page 8: Oil Warning

    RAAC2/24 and RAAC2.5/36 Oil Warning : This unit is shipped without oil in the compressor pump. Oil must be added to the unit prior to operating. Using the oil provided carefully fill the crank case until the oil reaches the red mark on •...
  • Page 9: Operation

    RAAC2/24 and RAAC2.5/36 Operation The pressure in the tank is controlled by the action of the pressure switch located under the pressure switch cover When the set maximum pressure is reached the pressure switch activates and the motor is turned off. The pressure will then decreases as the air is used until the set minimum is reached after which the pressure switch turns the motor to on again.
  • Page 10: Maintenance

    RAAC2/24 and RAAC2.5/36 MAINTENANCE Warning: Before maintenance operation, stop the air compressor, disconnect the unit from the mains supply and discharge all air in the air tank. Daily 1. Check oil level before each use. 2. Drain the condensation from the air receiver.
  • Page 11: Troubles And Remedies

    RAAC2/24 and RAAC2.5/36 TROUBLES AND REMEDIES Trouble Possible causes Remedies Fault in line, or voltage insufficient Check the line ⑴ ⑴ Power wire too thin or too long Replace the wire ⑵ ⑵ Motor unable to Fault in pressure switch Repair or replace ⑶...
  • Page 12 RAAC2/24 and RAAC2.5/36...

This manual is also suitable for:

Raac2.5/36

Table of Contents