Related Manuals for Screen Research MS2
Summary of Contents for Screen Research MS2
- Page 1 Installation Manual Motorized Supreme 2 Drop Down Screens In-Ceiling Slot Opening with TFX Floating Tab-Tensioning...
-
Page 2: Table Of Contents
Table of Contents Please read this manual before starting work. Tools & Storage Transit security fixings Ceiling mounting Screen transit locking removal Manual switch connection Manual deployment of the screen Removal of masking transit security screws End travel verification MCS installation MCS configuration - testing Installation of the slot aperture plate(s) Installation of slot aperture end-plates... - Page 3 Recommendations Casing and Fixing Hole Dimensions Ø 10 mm ( 13 / ”) 3 0 m m 3 0 m m ” ) ” ) D - 6 0 D - 6 0 m m ( 2 m m ( 2 ”...
-
Page 4: Tools & Storage
Tools & Storage Do not store standing Essential Tools Provided MS2-IS (80-100") MS2-IS (100-120") MMS2-L1/T-IS (80-100") MS2-IS (120-160") MMS2-L1/T-IS (100-160") & / or MMS2-4/L2-IS (All sizes) Transit Security Fixings Models without masking. Models with horizontal masking. Models with lateral masking. -
Page 5: Ceiling Mounting
Ceiling Mounting Mount the screen into the ceiling as shown below. L - 6 0 ( 2 3 / 8 " ) Use fixings suitable for load bearing structure Screen transit locking removal REMOVE REMOVE * BB (Black Backing) layer may not be present on your model. * M (Masking) may not be present on your model. -
Page 6: Manual Switch Connection
Manual Switch Connection Screens with masking require more than one connection. IMPORTANT ONLY FOR MODELS WITH MASKING - Use the Reverse adaptor supplied to connect the switch to the screen motor. Never use the reverse adaptor to connect switches to the masking motors. - Connect plugs matching the color rings (Blue to Blue, Yellow to Yellow). -
Page 7: End Travel Verification
The end stop limits are set at the factory, but may have been released during shipping. Failure to perform this procedure will void any subsequent claims made under the product warranty. Please contact Screen Research if you have any questions. Perform this step for all motors/masks ! -
Page 8: Installation Of The Slot Aperture Plate(S)
Installation of the slot aperture plate(s) s e n p r e o n l y o d e a t e e p l i n m r t u r e r t a A p e i n c o d e a l l m t i n... -
Page 9: Manual Adjustment Of Motor End-Stops
Manual adjustment of motor end-stops Please, follow this step ONLY if the end of travel of the motors has moved during transit. If your screen automatically stops at the desired full extension and full winding up, you do NOT need this step. Using a screwdriver, push the two buttons in order to free the screen stopping positions. -
Page 10: Warranty
Screen Research or an authorized Screen Research dealer or installer. -
Page 11: Legal Information
(France); No. 10/557 781 (USA) pending; No. 04742791.9 (Europe) pending; No. 6,785,047 (USA) ClearPix, ClearPix2, SolidPix, SolidPix1, GrayPix, X-Mask, C-Mask, LeWing, TheaterCurve, Pi-Grip, FastGrip, TFX, StopLight, DécorMask, TailorMade and the Screen Research logo are all trademarks of Screen Research. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the MS2 and is the answer not in the manual?
Questions and answers