Crankshaft End Play - Briggs & Stratton Vanguard 05000 Manual

10
202
Fig. 40
Fig. 41
Fig. 42

CRANKSHAFT END PLAY

When cylinder cover or sump is installed with a
standard gasket, end play should be as listed in
SECTION 14- ENGINE SPECIFICATIONS.
Always measure end play with a standard gasket
in place.
If end play is less than listed:
• Use additional gasket(s) between the oil
sump and cylinder to get proper end play.
If end play is more than listed:
• Use Part shim on magneto end
#220624
of crankshaft ([A] Fig. 43 non-pump
applications) or on PTO end of
crankshaft ([B] Fig. 44 pump
applications).
Fig. 43
Fig. 44