Page 1
INSTRUCTION MANUAL HDR10T01 323/0750 Important - Please read these instructions fully before installing or operating and keep for future reference. These instructions contain important information which will help you get the best from your television and ensure safe and correct installation and operation.
Contents Safety Precautions ..........3 Power Cord ............3 Overview of the Remote Control ......5 Connections on the Set Top Box ......6 Inserting Batteries in the Remote Control....7 Connecting the Set Top Box to a TV Set ....7 Antenna Connection ..........
Page 3
Features Accessories • 200 channels Please make sure that the following items are included with your device. • Programme recording • 8-Days EPG. • TV scart (with RGB and CVBS support). • Favourite list. • Parental lock options. • Manual and automatic search options. •...
• Should any solid object or liquid fall into the cabinet, Safety Precautions unplug the device and have it checked by qualified Power Source Power personnel before operating it any further. • Always use the provided AC adaptor. • The device should not be exposed to dripping or splashing and no objects filled with liquids, such as •...
Page 5
This equipment has been designed and switch on the equipment and make sure that your family know how to do this. Special manufactured to meet international safety standards but, like any electrical equipment, arrangements may need to be made for infirm or handicapped people.
Connections on the Set Top Box FRONT VIEW BACK VIEW 1. USB INPUT: To connect external USB storage devices. 2. OPTICAL AUDIO OUT: You can use this connector to output the digital audio to an external device. See your audio system instruction book for further information. 3.
Inserting Batteries in the Remote Control • Remove the battery cover located on the back of the remote control by gently pulling backwards from the indicated part. • Insert two AAA/R3 (2 X 1.5Volt) or equivalent type batteries inside. Place the batteries in the correct direction observing the polarity symbols (+/-) and replace the battery cover.
Power Connection MPORTANT: The set-top box is designed to operate on 12 V DC. For this, an adaptor is used which gives 12 V voltage. Connect this adaptor to a system that supplies 220-240V AC,50Hz. • After unpacking, allow the set-top box to reach the ambient room temperature before you connect the set to the mains.
Page 10
Power On-Off Connect all cables before plugging into the mains. After plugging in the AC adaptor for the set top box to the mains supply, red light will be seen on the front panel (Standby mode). When the set top box is first powered up please wait until the box is initialized before activating the receiver since booting of software will take some time.
When the HDD is out of space, it will operate regarding Important - Hard Disk Information one of these options and delete the This Recorder has a built in hard disk (abbreviated recordings. as HDD ) for recording and playback. Beware of •...
• To start installation process, select Yes by using First Time Installation “ ”/“ ” buttons and then press the OK button. IMPORTANT: Ensure that the aerial is connected • The box will start to search available stations. The before switching on the set top box for the first progress bar will move along the line.
Time Shifting (Pause Live Recording) • To cancel mute, you can press button again or use the V +/- buttons. On-Screen Information • You can press the INFO button to display on-screen information. Details of the station and current programme will be displayed on the information screen.
• Press MENU button to view main menu. Select • A message will be displayed to confirm your decision. Channel List item by using “ ”/“ button. Press Select YES to delete the selected channel, select OK to view menu contents. NO to cancel.
• Mark the other channels you want to lock the same • Press “ ”/“ ” buttons to navigate through channels. way and press OK. • Press “ ”/“ ” buttons to navigate through the • Enter the pin code in the menu displayed and press programme list.
Record Programme Highlight it and press OK button to set the programme to recording. Record Series/Delete Series In the EPG menu, after you have selected a programme, press the OK button and select the Record Series option and press the OK button again.
Resume: Resumes the recording. Recordings Library Play from offset: Begins playing,from the time which To view the list of recordings, press the MENU button is entered. to display the main menu and use “ ”/“ ” buttons to Manage chapters : It will display any marked chapters highlight the “Recordings Library”...
Viewing USB Disk Contents Text After you have selected the Include option in the You can play music, video and picture files from a “Main Title” menu, you can edit the main title. USB memory stick, but only music and picture can be played from an external Hard Disk Drive.
Page 19
Play ( Button) : Play files Pause ( Button) : Pauses the playback Stop ( Button) : Stop the playing file Rewind ( Button) : Goes backward Fast Foward ( Button) : Goes foward GREEN : Jumps to the selected time LANG : Set subtitle or audio Playing JPEG Files...
Page 20
• Select Configuration from Setup & Retune menu and press OK to continue. • You can press BACK button to exit Max Time Shift Select the maximum time allowed for timeshifting. See Time Shifting section for more information on Active channels timeshifting •...
Output Settings • You can enable or disable automatic upgrade by setting Automatic Scanning option. • You can manually search for new software by selecting Scan for upgrade. • You can also update your set top box by using the USB upgrade option.
About Select About and press OK button to display system information. Current (*) (*) These settings can be changed if only the broadcaster supports. Otherwise, settings will not be available to Audio Description be changed. This function enables or disables the audio description •...
• Highlight Yes or No by using “ ” or “ ” buttons and press OK button to confirm. • If Yes is selected, automatic search starts. • Selecting No cancels automatic search. • After the scanning is completed, your set top box will store all the available channels.
• When such a channel is selected, it will usually display Internet Portal the opening page of information automatically, after a You can access internet portal using your set-top box. short break. To do this, an active internet connection is required. •...
Troubleshooting Problem Possible Reasons What To Do Check if the AC adaptor is The LED indicator does not glow. Power Adaptor is not connected. plugged into the power socket. Check the aerial and video No picture or sound. No signal or weak signal. connections (scart).
GENERAL CHARACTERISTICS Power supply for set-top box 12 V DC 2Amp Preffered DC Adaptor 220 - 240 V AC, 50-60Hz Input Frequency 470Mhz-862Mhz Frequency Band Maximum Power consumption 17,5 W Standby Power Consumption 0,5 W Operating temperature 5ºC to +40ºC Storage temperature -15ºC to +55ºC Humidity...
REMOTE CONTROL Operating Distance 7 m Max. Batteries 2x1.5V Micro (R-03/AAA) TUNERS 1 xRF In IEC-type, female (75Ohm) 1 x RF Out (loop through) IEC-type, male (75Ohm) HARD DISK Hard Disk capacity 320 GB, 500 GB, 1 TB FRONT PANEL Display Seven segment display Remote Control Keys...
Page 28
Hitachi is not responsible for any of the content or services and does not warrant the availability of or access to such content or services. For information on a particular service or on any content, please visit the service/content provider’s website.