Headset Compatibility
grammable Feature. The key lights while the extension is in the Headset mode, and is off while the Headset
mode is disabled. If an extension user is on a call, pressing the Headset key automatically switches the
active call to the headset. Pressing the Headset key again switches the call back to Handsfree.
Off-Hook Signaling and Headsets
Outside Calls (transfers and DILs)
If the extension is set up to receive Camp-On tones for waiting (transferred) outside calls, the user will hear
the Camp-On tones in their headset. They will also hear Camp-On tones in their headset for a waiting Direct
Inward Line (DIL). The extension will not, however, receive Camp-On tones for Key Ring calls ringing the
phone while it is in the headset mode.
An extension in the headset mode will not hear Off-Hook Ringing.
Intercom Calls
If the extension is set up to receive Camp-On tones for waiting Intercom calls, the user will hear tones in
their headset when a co-worker dials 2 to wait in line.
Operation
To connect the headset:
1.
Plug a compatible headset into the telephone headset jack.
To turn the headset mode on and off:
1.
Do one of the following.
a.
Press the headset Feature Key on your telephone or DSS Console.
b.
Use the User Programmable Features (see below).
While in the headset mode:
1.
You can do the following.
Press a line key to place or answer an outside call.
a.
Press INTERCOM to get Intercom dial tone.
b.
If on a call, press SPEAKER to hang up.
c.
User Programmable Feature
Feature
Headset Compatibility
86 ◆ Features
Using the Headset
Turning the Headset Mode On and Off
Mnemonic
#HS (#47)
#HS
+ Y to enable or N to disable + SPEAKER to exit.
Operation
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Access Level
3-5
DSX Feature Handbook