NEC EXPRESS5800 N8800-096F User Manual page 59

2.
Prepare the installation from the module#0.
The location of the parts required for operations and check are show below:
Front
View
Module
POWER
switch
Module
POWER
LED
Power supply unit LED
Rear
View
AC inlet
(PSU 0)
<When the AC power is on (The power cords are plugged to the wall outlet)>
(1) Confirm the POWER LED of the system.
FAULT
LED
AC inlet
(PSU 1)
Cooling fan LED
Power supply
unit LED
If the POWER LED is lit, shut down the OS and unplug the AC power cord
after the POWER LED turns off.
If the POWER LED is turned off, unplug the AC power cord.
CPU/IO
module #1
Status LED
UID LED
Cooling fan LED
Windows Setup 4-7
POWER LED
DISK
ACCESS
LED
FT Status LED
CPU/IO
module #0
POWER
switch
NMI
switch