Wireless Bridge - TP-Link TD-w8960n User Manual

TD-W8960N
4.6.5

Wireless Bridge

Choose "Wireless""Wireless Bridge", you will see the screen of Wireless--Bridge settings
shown as below. You can configure wireless bridge features of the wireless LAN interface and
click Apply/Save button to save the current configuration.
AP Mode: Select an AP Mode from the drop-down list. Options available are: Access Point

and Wireless Bridge.
• Access Point: Select this option to allow wireless stations including AP clients to access.
• Wireless Bridge: Also known as WDS (Wireless Distribution System), it will bridge the
wireless stations in bridge mode.
Bridge Restrict:

• Disabled: Select this option to disables wireless bridge restriction, that any wireless bridge
will be granted access.
• Enabled: Select this option (as shown below) to enables wireless bridge restriction, please
enter the MAC address of the Remote Bridges that you want to connect with, and only
these Remote Bridges are granted access.
• Enabled (Scan): Select this option to enables wireless bridge restriction, and it will scan
the environment for APs that exist around the device. Only those selected AP will be
granted access.
• Refresh: Click this button to scan and display the APs.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-87
Figure 4-88
69