Dell Inspiron 4100 Manual page 132

Hide thumbs Also See for Inspiron 4100:
Table of Contents

Advertisement

Removing and Replacing Parts: Dell Inspiron 4100
2. Remove the
3. Remove the
4. Remove the hinge covers.
5. Remove the two M2 x 4-mm screws on the left side of the display panel and the
two M2 x 4-mm screws on the right side of the display panel.
HINT:
If you have a Hitachi display panel, remove the two M2 x 4- mm screws
from the center of the left side of the display panel.
6. Remove the M2 x 4-mm screw that secures the display-feed flex cable to the
display assembly through the black plastic flex-cable retention bracket.
7. Lift from the top and rotate the display panel out of the top cover.
8. Disconnect the bottom flex-cable connector from the inverter connector by
pulling straight up on the attached pull tab.
file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (31 of 58) [2/28/2004 7:04:06 AM]
display
assembly.
display
bezel.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents