Installing Microsoft Activesync - NEC MOBILEPRO 900 User Manual

Handheld pc
Hide thumbs Also See for MOBILEPRO 900:
Table of Contents

Advertisement

Check the device manager on your host PC to identify potential
4.
conflicts for the infrared port.
!
!
!
Reboot your host PC.
5.
Once the system restarts, an infrared icon (gray vertical bar with a
red bump) appears in the system taskbar. If there is an X to the
right of the icon, infrared is not enabled. Repeat steps 1-4 to
enable infrared.

Installing Microsoft ActiveSync

You must install Microsoft ActiveSync on your host PC to enable
synchronization with your MobilePro. The Microsoft ActiveSync 3.1
CD that ships with your MobilePro contains the ActiveSync software
designed for synchronization with Microsoft Office components. The
following procedure assumes Microsoft Outlook as the host PC
synchronization component.
Note
Host PC systems with the Microsoft Windows XP operating system
require ActiveSync 3.5.
You can download ActiveSync 3.5 from the NEC Solutions America
support site (
Upgrade to Microsoft ActiveSync 3.5
(
www.microsoft.com/mobile/pocketpc/downloads/activesync35.asp
1-28 Getting Started
Double click the System icon, select the Hardware tab, and
select the Device Manager button.
Check the Ports listing to determine if any conflicts exist
(another device is assigned to or is using the infrared port).
The port may be flagged with an exclamation point, for
example, if any conflicts exist.
If another device is assigned to or is using the infrared port,
you must reassign the device to free up the infrared port for
MobilePro synchronization.
The Microsoft ActiveSync software contains ActiveSync 3.1.
www.necsolutions-am.com/support,
select
) or from the Microsoft Web site
and
Handhelds
).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp9000

Table of Contents