NEC PlasmaSync 42XP10 User Manual page 19

Main Menu Sub Menu
SCREEN ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
CLOCK PHASE
CLOCK
UNDER SCAN
Available only when
the Advanced OSD
function is enabled.
OPTION1 OSD
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
Sub Menu2 Sub Menu3 Explanation
Selects aspect ratio of the displayed image. Press + or
- to select.
Controls the vertical position of the image within the
Display area of the PDP.
Press + to move up. Press - to move down.
Controls the horizontal position of the image within the
Display area of the PDP.
Press + to move right. Press - to move left.
Adjusts the vertical size of the image.
Adjusts the horizontal size of the image.
ON: H-Position, V-Position, Clock and Clock Phase are
adjusted automatically.
OFF: H-Position, V-Position, Clock and Clock Phase are
adjusted manually.
VGA and RGBHV input only.
Adjusts the visual "noise" on the image.
VGA and RGBHV input only.
Press + to expand the width of the image on the right of
the screen.
Press - to narrow the width of the image on the left.
VGA and RGBHV input only.
ON: UNDERSCAN is selectable in the ASPECT MODE
menu.
OFF: UNDERSCAN item is not selectable in the ASPECT
MODE menu.
Video signal input only.
DISPLAY OSD ON: Information about inputs, screen size, etc. is shown.
OFF: No information is shown.
OSD Change the position of the menu between 1 and 6. Press
POSITION + or - to adjust.
OSD ORBITER ON: The menu position intermittently shifts eight dots
while the OSD is being displayed.
OFF: The menu position does not shift.
OSD TRANSP. Adjusts the transparency level of the OSD.
Press + or - to adjust.
Selects the input type when using 5BNC connectors.
RGB: For RGB input.
COMP.: For Component input (3BNC connectors).
SCART1: For SCART input (4BNC connectors).
SCART2: For SCART input (3BNC connectors and VIDEO1
input).
SCART1, SCART2 available for Europe and World-Wide
models only.
Selects the input type when using a mini D-SUB
connector.
RGB: For RGB input.
SCART3: for SCART input.
SCART3 available for Europe and World-Wide models
only.
If there is a problem with signal detection, this function
forces the monitor to display the signal at the desired
resolution.
If no problem is detected, the only available option will be
"AUTO".
VGA and RGBHV input only.
Manually selects signal output when similar 1080I signal
are detected.
1080B: Standard digital broadcasts.
1080A: Special digital broadcasts (ex. DTC100).
Skips to next input if present input signal is not detected.
This function is valid only for INPUT key on the display.
Resets settings back to factory default values.
English-16
On-Screen Display (OSD)
Default Reset
0 YES
0 YES
0 YES
0 YES
OFF NO
0 YES
0 YES
OFF YES
ON YES
1 YES
OFF YES
70% YES
RGB YES
RGB YES
AUTO YES
1080B NO
OFF YES
OFF