Disc Finalize; Disc Initialize - NEC NDRV-60 Owner's Manual

Before Operation (Continued)
DISC

Disc Initialize

DVD-R:
DVD-RW:
DVD+R:
DVD+RW:
Disc Initialize

Disc Finalize

Disc Label
Disc Protect
PBC
AutoPlay
Press SETUP.
1 1
Use v / V to select the DISC option.
2 2
While the DISC option is selected, press B to
3 3
move to the second level.
Use v / V to select the Disc Initialize option.
4 4
Press B to move to the third level.
5 5
Press ENTER.
6 6
In case of DVD-RW, use b / B to select a desired
7 7
Disc Format Mode (VR Mode or Video Mode)
then press ENTER.
In case of DVD+RW, go to step 8.
Disc Initialize
Select a mode.
VR Mode Video Mode
Use b / B to select "OK" then press ENTER.
8 8
Disc Initialize
All data on the disc will be deleted.
Proceed?
OK
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
26
Start
Cancel
Disc Finalize
Caution
• When DVD-R, DVD-RW, and DVD+R recording,
you've finalized a disc recording, you can't edit or
record anything else on that disc except
DVD+RW.
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
PBC
AutoPlay
Follow steps 1-3 as shown on page 26 (Disc
1 1
Initialize).
Use v / V to select the Disc Finalize option.
2 2
Press B to move to the third level.
3 3
Press ENTER.
4 4
Finalize
Do you want finalization?
OK
Select OK then press ENTER.
5 5
ote
ip
Finalize
Unfinalize
Cancel