Related Manuals for NEC NDV-27
Summary of Contents for NEC NDV-27
-
Page 1: Dvd Player
DZ9311CPD_HA2ANN_ENG DVD Player OWNER’S MANUAL MODEL: NDV-27 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. P/NO : 3834RD0065W... -
Page 2: Safety Precautions
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. -
Page 3: Table Of Contents
DVD Player Connections ........ -
Page 4: Before Use
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location. Symbol Used in this Manual... -
Page 5: Maintenance And Service
Maintaining the Unit The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use. -
Page 6: Front Panel
STOP ( x ) Stops playback. OPEN / CLOSE ( Z ) Opens or closes the disc tray. Disc Tray Insert a disc here. Remote Sensor Point the DVD Player remote control here. Display window Shows the current status of the player. -
Page 7: Remote Control
Remote Control OPERATE Switches DVD Player ON and OFF. DVD MENU Accesses menu on a DVD disc. • b B v V (left/right/up/down) Selects an item in the menu. • ENTER Confirms menu selection. DISPLAY Accesses On-Screen display. • PAUSE/STEP ( ; ; ) -
Page 8: Setting Up The Player
Video and Audio Connections to Your TV Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system. -
Page 9: Audio Connection To Optional Equipment
A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio / video receiver that supports one or more of the audio formats supported by your DVD player such as MPEG 2, Dolby Digital and DTS. Check the receiver manual and the logos on the front of the receiver. -
Page 10: General Features
General Features On-Screen Display Some items can be changed using the menu. 1. Press DISPLAY during playback. 2. Press b /B to select an item. The selected item is highlighted. 3. Press v /V to change the setting. Press ENTER. You can also use the number buttons if appropriate (e.g. -
Page 11: Marker Search
General Features (continued) Marker Search To enter a Marker You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers. -
Page 12: Zoom
Screen Saver The screen saver appears when you leave the DVD player in Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the DVD Player automatically turns itself off. -
Page 13: Playing An Audio Cd And Mp3/Wma Disc
• They should not contain special letters such as / ? * : “ < > l etc. • The total number of files on the disc should be less than 648. This DVD player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. -
Page 14: Audio Cd And Mp3/Wma Disc Features
Playing an Audio CD or MP3/WMA Disc (continued) Audio CD and MP3 / WMA Disc Features Pause 1. Press PAUSE/STEP during playback. 2. To return to playback, press PLAY, ENTER or press PAUSE/STEP again. Moving to another Track 1. Press SKIP (. or >) briefly during playback to go to the next track or to return to the beginning of the current track. -
Page 15: Viewing A Jpeg Disc
• Depending upon the size and number of JPEG files, it could take a long time for the DVD player to read the disc’s contents. If you don’t see an on-screen display after several minutes, some of the files may be too large — reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc. -
Page 16: Programmed Playback
Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks (Audio CD, MP3/WMA). 1. Insert a disc. (Audio CD, MP3 or WMA.) 2. Press v / V to select the desired file. 3. -
Page 17: Initial Settings
Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 17 to 22. -
Page 18: Display
Caution If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. If you set Progressive Scan to On in error, you must reset the unit. 1) Press B. Select “Off” using the v / V buttons. -
Page 19: Audio
Select Exit Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. PCM (for Dolby Digital / MPEG): Select when connected to a two-channel digital stereo amplifier. -
Page 20: Lock (Parental Control)
Initial Settings (continued) LOCK (Parental Control) LOCK Rating Unlock Password Area code Move Select Exit Rating Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. - Page 21 Initial Settings (continued) Password (Security Code) You can create or change password. 1. Select Password on the LOCK menu then press B. The “Change” is highlighted 2. Press ENTER then the password window will appear. 3. To make a new password: When the “New Password”...
-
Page 22: Others
You can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. If Auto Play mode is set to On, this DVD player will search for title that has the longest playback time and then play back the title automatically. -
Page 23: Additional Information
OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER,PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. -
Page 24: Troubleshooting
• The rating level is set. • The remote control is not pointed at the The remote control does remote sensor on the DVD player. not work properly. • The remote control is too far from the DVD player. -
Page 25: Language Codes
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Abkhazian 6566 Fiji Afar 6565 Finnish Afrikaans 6570 French Albanian 8381 Frisian Ameharic 6577 Galician Arabic 6582 Georgian Armenian... -
Page 26: Area Codes
Area Codes Choose an area code from this list. Area Code Area Afghanistan Ethiopia Argentina Fiji Australia Finland Austria France Belgium Germany Bhutan Great Britain Bolivia Greece Brazil Greenland Cambodia Heard and McDonald Islands Canada Hong Kong Chile Hungary China India Colombia Indonesia... -
Page 27: Specifications
Specifications General Power requirements: AC 110-240 V , 50/60 Hz Power consumption: 8 W Dimensions (Approx.): 360 x 35 x 242 mm (W x H x D) without foot Weight (Approx.): 1.7 kg Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 5 % to 90 % Outputs VIDEO OUT:... - Page 29 Western Australia Perth 45 Sarich Court, Osborne Park, 6017 For service in outer areas, please contact your NEC retailer for the address of the nearest NEC Australia Pty. Ltd. Authorized Service Centre. NEC Australia Pty Ltd 244 Beecroft Road EPPING 2121 Tel.