Operation Of Ignition Switch - TGB X-MOTION 250 User Manual

7. USE OF EACH COMPONENT

OPERATION OF IGNITION SWITCH

"Start" position
 Engine can be started in this position.
 Ignition switch key can not be removed.
"Stop" position
 Engine is shut off and can not be started in
this position .
 Ignition switch key can be removed.
"OPEN" position (fuel tank cap open) ：
 How to open：Insert your key into the ignition switch, and turn it to the left.
 How to lock：Push the fuel tank cap and it locks automatically.
CAUTION:
 Never operate the ignition switch key when the scooter is running.
"OFF" and "LOCK," will shut off the electrical system and that may result in a dangerous
accident. Therefore, the ignition switch can only be turned off after the scooter has been
completely stopped.
 Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your scooter.
 If ignition switch remains in the "ON" position for a prolonged period after the engine has been
stopped, the battery's capacity will be reduced and this may affect the engine's start ability.
IGNITION SWITCH KEY
"Steering handle lock" position
 Turn the steering handle to left and press
ignition switch key down and then lightly turn it
to left to the "LOCK" position.
 The steering handle is locked in this position.
 Ignition switch key can be removed.
 When unlocking, simply turn the key from
"LOCK" to "OFF."
To turn the ignition switch to
8