Using Do-Not-Disturb - Panasonic DBS 576 User Manual

5. Communicating Within Your Office
and indicates the origin of the first message (i.e., the extension number or voice mail).
Note: On a large-display phone, you can use the MSG key to answer callback
requests.
To send a Message Waiting/Callback request
1. Pick up the handset or press the ON/OFF key.
2. Dial the extension number.
3. While the phone is still ringing or when you hear the busy tone, enter the
Message Wait code (default = 4). (The message lamp flashes at the called
extension.)
Note: You need to dial 1 to change to tone calling before sending the message.
4. Replace the handset or press the ON/OFF key.
To respond to a Message Waiting/Callback request
Note: Multiple messages are accessed in the order in which they are received.
1. Pick up the handset or press the ON/OFF key.
2. Do one of the following:
To . . .
Answer a callback request Enter the Message Wait/Callback Set code (default =
*6). Or, if using a large-display phone, press the MSG
key.
• Phone automatically dials the extension that sent the
callback request
• Message lamp goes off when the call is answered
* Cancel a Message Enter the Cancel Message Waiting/Callback code
Waiting/Callback request (default = *5).
* Only the person receiving a Message Waiting/Callback request can cancel the request.
(The sender of a callback request cannot cancel the request once it has been sent.)
3. Replace the handset or press the ON/OFF key.

USING DO-NOT-DISTURB

Use DND to temporarily stop calls from coming to your extension.
58 DBS 576 (USA), issued January 1999
Do . . .
576-25-750