Advanced Option - NEC MultiSync LCD4020 User Manual

ADVANCED OPTION

INPUT DETECT
All inputs except for TV
NONE
FIRST DETECT
LAST DETECT
VIDEO DETECT*
LONG CABLE ON/OFF
VGA, RGB/HV inputs only
LONG CABLE MANUAL
VGA, RGB/HV inputs only
RED DELAY
GREEN DELAY
BLUE DELAY
RED SHARPNESS
GREEN SHARPNESS
BLUE SHARPNESS
SOG PEAK.
VIDEO EQ.
RGB/HV input only
SYNC TERMINATE
RGB/HV input only
DVI MODE
SCAN CONVERSION
All inputs except VGA, RGB/HV
PROGRESSIVE
INTERLACE
SCART MODE*
S-VIDEO MODE*
PRIORITY
SEPARATE
COLOR SYSTEM*
VIDEO input only
AUTO
NTSC
PAL
SECAM
4.43NTSC
*: The product you purchased may not have this feature.
Selects the method of input detection the monitor uses when more than two input devices
are connected.
The Monitor will not search the other video input ports.
When the current video input signal is not present, then the monitor searches for a video signal
from the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
The monitor will not look for other video signals while the current video source is present.
When the monitor is displaying a signal from the current source and a new secondary source
is supplied to the monitor, the monitor will automatically switch to the new video source.
When current video input signal is not present, the monitor searches for a video signal from
the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
DVD/HD or VIDEO inputs will have priority over DVI, VGA, RGB/HV. When DVD/HD or
VIDEO input signal is present the monitor will change and keep to the DVD/DH or VIDEO
input.
Compensates for image degradation caused from using a long cable.
Manually compensates for image degradation caused from using a long cable.
Adjusts the phase of the red signal.
Adjusts the phase of the green signal.
Adjusts the phase of the blue signal.
Adjusts the performance degradation of the RED signal.
Adjusts the performance degradation of the GREEN signal.
Adjusts the performance degradation of the BLUE signal.
Adjusts the shape of Sync on Green signal.
Optimize the shape (Tailing) of RED, GREEN and BLUE signals.
Selects the terminate resistance for matching the cable impedance.
Selects the kind of DVI-D equipment which is connected DVI.
Select "DVI-PC" when PC or other computer equipment is connected.
Select "DVI-HD" when DVD player, which has DVI-D output, is connected.
Selects the IP (Interlace to Progressive) conversion function.
Note: For DVI input "DVI-HD" need to be enabled in the DVI mode menu.
Converts interlaced signals to progressive. This is the default setting.
Disables IP conversion. This setting is best suited for motion pictures, but increases the risk
of image retention.
Input mode for devices using SCART connectors.
Selects the S-Video input port function.
When an S-Video cable is connected to the S-Video input, it will have priority over the
composite input port.
The S-Video port and Composite port can be selected as independent input ports.
The selected Color System depends on the video format of the input signal.
Automatically chooses Color System setting based on input signal.
English-28
FIRST DETECT
OFF
0
0
0
23
23
23
0
0
HIGH
DVI-PC
PROGRESSIVE
OFF
PRIORITY
AUTO