Audio; Schedule; Pip; Osd - NEC MultiSync LCD3215 User Manual

CUSTOM ZOOM
ZOOM
H ZOOM
V ZOOM
H POS
V POS
H RESOLUTION
INPUT RGB1, 2, 3 only
V RESOLUTION
INPUT RGB1, 2, 3 only
INPUT RESOLUTION
INPUT RGB2, 3 only
ADJUST RESET

AUDIO

BALANCE
TREBLE
BASS
AUDIO RESET

SCHEDULE

OFF TIMER
SCHEDULE
DATE AND TIME
SCHEDULE RESET

PIP

PIP SIZE
PIP AUDIO
PIP RESET

OSD

LANGUAGE
OSD TURN OFF
OSD V-POSITION
OSD H-POSITION
INFORMATION OSD
MONITOR INFORMATION Indicates the model and serial number of your monitor.
OSD RESET
"CUSTOM ZOOM" will be selected when you select "CUSTOM" on the screen "ZOOM" mode.
Expands the horizontal and the vertical size simultaneously.
Expands the horizontal size only.
Expands the vertical size only.
Moves to the right with + button. Moves to the left with - button.
Moves up with + button. Moves down with - button.
Adjusts the horizontal size of the image.
Press + button to expand, and press - button to narrow the width of the image on the screen.
Adjusts the vertical size of the image.
Press + button to expand, and press - button to narrow the width of the image on the screen.
Selects to decision of input signal timings 1024x768, 1280x768 and 1360x768, if there is a
detection problem.
If no problem is detected, the only available option will be "AUTO".
Resets the all settings within the ADJUST menu back to factory setting.
Adjust the balance of L/R volume.
To accentuate or reduce the high frequency sound. Press + to increase, press - to decrease.
To accentuate or reduce the low frequency sound. Press + to increase, press - to decrease.
Resets the all settings within the AUDIO menu back to factory setting.
Sets the monitor to power off after a length of time.
A time between 1 to 24 hours is available.
Creates a working schedule for the monitor to use. This OSD can't remove except EXIT.
(See "NOTE 1" on page 25 for further information).
Sets the date, time, and daylight saving region.
Setting item: YEAR/MONTH/DAY/HOUR/MINUTE/DAYLIGHT SAVING TIME
Date & time must be set in order for the "SCHEDULE" function to operate.
Resets the all settings within the AUDIO menu back to factory setting except DATE AND
TIME setting.
Selects the size of sub-picture used in "Picture-in-Picture" (PIP) mode.
"Large", "Middle" and "Small" are available.
Selects the sound source in PIP mode.
Resets the all settings within the PIP menu back to factory setting.
Selects the language used by the OSD from seven languages.
ENGLISH/DEUTSCH/FRANÇAIS/ESPAÑOL/ITALIANO/SVENSKA/
Turns off the OSD after a period of inactivity. The preset choices are 5 - 120 seconds.
Adjusts the vertical position of the OSD menu.
Adjusts the horizontal position of the OSD menu.
Selects the information OSD displays or not. The information OSD will display when input signal
or source change or warning message like as no-signal or out-of range.
A time between 1 to 10 seconds is available.
Resets the all settings within the OSD menu back to factory setting.
English-22